TSG 21-2016XG1-2020/XG1-2020 Supervision Regulation on Safety Technology for Stationary Pressure Vessel,including Amendment 1 (English PDF)
This is a limited preview
Buy now to download the full PDF
Need quotation for your management?
Get a formal quotation for TSG 21-2016XG1-2020 in 30 minutes.
Issued by
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Level / Type
Industry · Mandatory
Issue date
January 4, 2021
Implementation date
June 1, 2021
Scope
TSG 21-2016XG1-2020 (/XG1-2020 Supervision Regulation on Safety Technology for Stationary Pressure Vessel,including Amendment 1) is available as an English-translated PDF.
Found what you need?
Document preview — TSG 21-2016XG1-2020
National Standard of the People's Republic of China
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
Contents
- 1 General Provisions 1
- 2 Materials 4
- 3 Design 13
- 4 Manufacturing 32
- 5 Installation, Transformation and Repair 48
- 6 Supervision and Inspection 50
- 7 Service Management 67
- 8 Periodical Inspection 76
- 9 Safety Accessories and Instruments 103
- 10 Supplementary Provisions 106
- 1 General Provisions
- 1.1 Purpose
- 1.2 Stationary pressure vessels
- 1.3 Applicable scope
- 1.4 Special provisions for applicable scope
- 1.5 Inapplicable scope
- 1.6 Definition of the scope of pressure vessels
- 1.6.1 Body of pressure vessel
- 1.6.2 Safety accessories and instruments
- 1.7 Classification of pressure vessels
- 1.8 Relationship with technical standards and management systems
- 1.9 Provisions for special treatment of inconformity to this Regulation
- 1.10 Coordinative standards and quoted standards (Note 1-7)
- 1.11 Supervision and management
- 2 Materials
- 2.1 General requirements of materials
- 2.1.1 Basic requirements
- 2.1.2 Application of materials with foreign designations
- 2.1.2.1 Materials manufactured by foreign material manufacturers
- 2.1.2.2 Steel plates (strips) manufactured by domestic material manufacturers
- 2.1.2.3 Selection of materials with foreign designations
- 2.1.3 Application of new materials
- 2.1.3.1 Materials not listed in the coordinative standards of this Regulation
- 2.1.3.3 Steel plates and forgings with thickness beyond the standard applicable scope
- 2.1.3.4 Requirements for material use
- 3 Design
- 4 Manufacturing
- 5 Installation, Transformation and Repair
- 6 Supervision and Inspection
- 7 Service Management
- 8 Periodical Inspection
- 9 Safety Accessories and Instruments
- 10 Supplementary Provisions
1 Foreword
TSG 21-2016XG1-2020 was issued by General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on 4 January 2021.
It has been in force since 1 June 2021.
The TSG prefix, without a suffix, marks a mandatory standard: within its scope, compliance is required.
2 Scope Preview
TSG 21-2016XG1-2020 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 144 other TSG standards.
In this catalogue, TSG standards carry edition years from 2004 to 2025.
3 About this standard
Issued by: General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
4 Classification and status
Prefix TSG: mandatory standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — all pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 33578.4-2026Rules for risk-based inspection of complete units — Part 4: Parabolic trough solar thermal power plants
- GB 12367-2025Safety specification for electrostatic paint spraying
- GB/T 26127-2025Compressed coalbed methane as vehicle fuel
- GB 25972-2024Gas fire extinguishing systems and components
- GB 43203-2023Code of practice for coal preparation plant safety
- GB/T 38109-2019Application guidance for safety accessories and instruments on pressure equipment
How to Download TSG 21-2016XG1-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
TSG 08-2026 — Special Equipment Service Administration Regulation
TSG 92-2026 — Safety Technology Regulation for Safety Accessories of Special Pressure Equipment
TSG Z6002-2026 — Examination Rules for Welding Operators of Special Equipment
TSG 21-2016XG1-2020
$345.00