GB/T 26127-2025Compressed coalbed methane as vehicle fuel (English PDF)
车用压缩煤层气
This is a limited preview
Buy now to download the full PDF (8 pages)
Need quotation for your management?
Get a formal quotation for GB/T 26127-2025 in 30 minutes.
Issued by
State Administration for Market Regulation; Standardization Administration of China
Level / Type
National · Recommended
Issue date
May 30, 2025
Implementation date
December 1, 2025
Scope
GB/T 26127-2025 is the English-translated version of 车用压缩煤层气.
GB/T 26127-2025 sets the quality requirements for compressed coalbed methane used as a vehicle fuel. It applies to the fuel at pressures not exceeding 25 MPa and sorts it into Class I and Class II, with the quality indicators in one table and the classification indicators in another.
Beside the requirements it gives the test methods, the inspection and determination rules and the provisions for storage and use, including the filter element pore size and the storage containers.
The tests it calls up come from the natural gas standards: GB/T 13610 for composition, GB/T 11060 for sulfur compounds, GB/T 11062 for calorific value, GB/T 17283 for water dew point and GB/T 27893 for particles.
Its terms come from GB/T 31537. It replaces GB/T 26127-2010, was issued on 30 May 2025 and has applied since 1 December 2025.
Found what you need?
Document preview — GB/T 26127-2025
National Standard of the People's Republic of China
- ICS
- 75.160
- Classification
- D20
Issued by: State Administration for Market Regulation; Standardization Administration of China
Contents
- Foreword3
- 1 Scope5
- 2 Normative References5
- 3 Terms and Definitions6
- 4 Quality Requirements6
- 5 Test Methods6
- 6 Inspection and Determination7
- 7 Storage and Use8
Foreword
This document was drafted in accordance with the rules provided in GB/T 1.1-2020 Directives for Standardization - Part 1: Rules for the Structure and Drafting of Standardizing Documents.
This document serves as a replacement for GB/T 26127-2010 Compressed Coalbed Methane as Vehicle Fuel. In comparison with GB/T 26127-2010, apart from structural adjustments and editorial modifications, the main technical changes are as follows.
a) The scope of application of compressed coalbed methane as vehicle fuel is modified (see Chapter 1; Chapter 1 of Version 2010);
b) The terms and definitions are modified (see Chapter 3; Chapter 3 of Version 2010);
c) The representation of methane is modified (see Table 1; Table 1 of Version 2010);
d) The quality indicator requirements for high calorific value, total sulfur and water dew point are modified (see Table 1; Table 1 of Version 2010);
e) The quality requirements for carbon dioxide and particulate matter are added (see Table 1);
f) The classification indicators for compressed coalbed methane as vehicle fuel are added (see Table 2);
g) The test method for total sulfur is modified (see 5.4; 5.3 of Version 2010);
h) The test method for hydrogen sulfide is modified (see 5.5; 5.4 of Version 2010);
i) The test method for carbon dioxide is added (see 5.6);
j) The test method for water dew point is modified (see 5.7; 5.5 of Version 2010);
k) The test method for particulate matter is added (see 5.8);
l) The provisions for labeling are deleted (see 7.1 of Version 2010);
m) The provisions for filter element pore size are added (see 7.2);
n) The provisions for storage containers are modified (see 7.3; 7.3 of Version 2010).
Please be noted that certain content of this document may involve patents. The institution issuing this document does not undertake the responsibility of identifying these patents.
1 Scope
This document specifies the quality requirements, test methods, inspection and determination, storage, and use of compressed coalbed methane as vehicle fuel.
This document applies to compressed coalbed methane used as vehicle fuel at a pressure not exceeding 25 MPa.
2 Normative References
The contents of the following documents constitute indispensable clauses of this document through the normative references in the text. In terms of references with a specified date, only versions with a specified date are applicable to this document. In terms of references without a specified date, the latest version (including all the modifications) is applicable to this document.
GB/T 11060.1 Natural Gas - Determination of Sulfur Compound - Part 1: Determination of Hydrogen Sulfide Content by Iodometric Titration Method
GB/T 11060.2 Natural Gas - Determination of Sulfur Compound - Part 2: Determination of Hydrogen Sulfide Content by Methylene Blue Method
GB/T 11060.4 Natural Gas - Determination of Sulfur Compound - Part 4: Determination of Total Sulfur Content by Oxidative Microcoulometry Method
GB/T 11060.8 Natural Gas - Determination of Sulfur Compounds - Part 8: Determination of Total Sulfur Content by Ultraviolet Fluorescence Method
GB/T 11060.10 Natural Gas - Determination of Sulfur Compounds - Part 10: Determination of Sulfur Compounds Using Gas Chromatography Method
GB/T 11062 Natural Gas - Calculation of Calorific Values, Density, Relative Density and Wobbe Indices from Composition
GB/T 13609 Natural Gas Sampling Guidelines
GB/T 13610 Analysis of Natural Gas Composition - Gas Chromatography
GB 17258 Steel Cylinders for the On-board Storage of Compressed Natural Gas as a Fuel for Automotive Vehicles
GB/T 17283 Determination of the Water Dew Point of Natural Gas - Cooled Surface Condensation Hygrometers
GB/T 27893 Natural Gas - Determination of Particles Content - Gravimetric Method
GB/T 31537 Terms Relating to Coalbed Methane (coal mine gas)
SY/T 6899 Natural Gas - Determination of the Water Dew Point - The Capacitance Method
TSG 21 Supervision Regulation on Safety Technology for Stationary Pressure Vessel
TSG 23 Regulation on Safety Technology for Gas Cylinder
3 Terms and Definitions
The terms and definitions defined in GB/T 31537 are applicable to this document.
4 Quality Requirements
Compressed coalbed methane as vehicle fuel is classified into Class I and Class II. The quality indicators shall comply with the provisions of Table 1, and classification indicators shall comply with the provisions of Table 2. […]
5 Test Methods
5.1 Sampling
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 8 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 11060.1Natural gas - Determination of sulfur compound - Part 1: Determination of hydrogen sulfide content by iodometric titration method
- GB/T 11060.2Natural gas - Determination of sulfur compound - Part 2: Determination of hydrogen sulfide content by methylene blue method
- GB/T 11060.4Natural gas -- Determination of sulfur compound -- Part 4: Determination of total sulfur content by oxidative micro-coulometry method
- GB/T 11060.8Natural gas - Determination of sulfur compounds - Part 8: Determination of total sulfur content by ultraviolet fluorescence method
- GB/T 11060.10Natural gas - Determination of sulfur compounds - Part 10: Determination of sulfur compounds using gas chromatography method
- GB/T 11062Natural gas - Calculation of calorific values, density, relative density and Wobbe indices from composition
GB 17258 · TSG 23
Similar standards
Editions of GB/T 26127
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 26127-2025 | Compressed coalbed methane as vehicle fuel | current edition | Current |
| GB/T 26127-2010 | Compressed coalbed methane as vehicle fuel | previous edition | Superseded |
This page sells the current edition, GB/T 26127-2025. Earlier editions are listed for reference only.
How to Download GB/T 26127-2025
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 11060.1-2023 — Natural gas - Determination of sulfur compound - Part 1: Determination of hydrogen sulfide content by iodometric titration method
GB/T 11060.10-2021 — Natural gas - Determination of sulfur compounds - Part 10: Determination of sulfur compounds using gas chromatography method
GB/T 11060.11-2014 — Natural gas -- Determination of sulfur compounds -- Part 11: Determination of hydrogen sulfide content by length-of-stain detector tubes method
Secure payment via Stripe
Payments accepted
GB/T 26127-2025
$120.00