SN/T 1688.5-2012Rules for the inspection of power-driven vehicles for import and export. Part 5: Electric motorcycles and electric mopeds (English PDF)

Foreword

SN/T 1688 "Importers motor vehicle inspection procedures" is divided into six parts.

--- Part 1. General requirements;

--- Part 2. Motorcycle;

--- Part 3. farm vehicles;

--- Part 4. automotive products;

--- Part 5. electric motorcycles and electric mopeds;

--- Part 6. engine.

This section SN/T 1688 Part 5.

This section drafted in accordance with GB/T 1.1-2009 given rules.

Please note that some of the content of this document may involve patents. Release mechanism of the present document does not assume responsibility for the identification of these patents.

This section proposed and managed by the National Certification and Accreditation Administration Committee.

Introduction

"Importers and inspection of motor vehicles - Part 5. electric motorcycles and electric mopeds" is the import and export of electric motorcycles and electric Fixed moped inspection work in accordance with the import and export of electric scooters and electric mopeds inspection play a guiding and regulating.

With China's accession to the World Trade Organization (WTO) and the revised "People's Republic of China Import and Export Commodity Inspection Law" Import and Export Commodity Inspection Test mode has undergone great changes, and changes in order to adapt to the situation, the national exit inspection and quarantine departments in charge of the establishment of immigration check Inspection and quarantine industry-standard system.

This part belongs to the standard system of inspection and quarantine fourth floor --- personality standard for electric motorcycles and electric mopeds characteristics, regulation Given the special requirements for import and export of electric scooters and electric mopeds inspection.

Import and export inspection of motor vehicles Part 5. electric motorcycles and electric mopeds

1 Scope

SN/T 1688 provisions of this part of the import and export of electric scooters and electric mopeds sampling, testing and the results of determination.

This section applies to the import and export two and three electric motorcycles and electric mopeds (unless otherwise specified, hereinafter referred to as the electric motor Car) test.

This section does not apply to off-road vehicles and racing test.

2 Normative references

The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein Member. For undated references, the latest edition (including any amendments) applies to this document.

GB/T 2828.11-2008 Sampling procedures for inspection - Part 11. Small claims overall level of quality assessment procedures GB/T 5359.1 motorcycles and mopeds Terminology - Part 1. Vehicle type GB/T 5359.4 motorcycles and mopeds Terminology - Part 4. Quality wheelers and tricycles GB/T 5382 motorcycles and braking requirements and test methods GB 7258-2004 the safe operation of motor vehicles technical conditions Graphic GB 15365 motorcycles and mopeds controls, indicators and telltales symbol GB/T 15367 wheelers and motorcycles and tricycles component name GB 24155-2009 electric motorcycles and electric moped safety requirements GB/T 24158-2009 electric motorcycles and electric mopeds general technical conditions Approval test procedures QC/T 791 electric motorcycles and electric mopeds the basic provisions of SN/T 0002 Electromechanical Import and Export Commodity Inspection procedures prepared

3 Terms and Definitions

GB/T 5359.1, GB/T 5359.4, GB/T 15367 and SN/T 0002 defined by the following terms and definitions apply to this document.

Sampling mode modeofsamplinginspection According to the mandatory requirements of national technical specifications, batch import and export commodities or pumping grant implementation sampling, testing and inspection of conformity assessment activities.

Type Test mode modeoftypetest According to a predetermined cycle based on the mandatory requirements of national technical specifications type testing, according to on-site inspection requirements for product pumping batch inspection Inspection, supervision and implementation of the conformity assessment activities of the enterprise quality management system.

Compliance Verification mode modeofcomplianceverification According to the mandatory requirements of national technical specifications, inspection certificate and inspection documents, goods are consistent with the random testing can be carried out when necessary, and real Shi conformity assessment activities supervision.