QC/T 792-2007Specifications for motors and controllers of electric motorcycles and electric mopeds (English PDF)
电动摩托车和电动轻便摩托车用电机及其控制器技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for QC/T 792-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
November 14, 2007
Implementation date
May 1, 2008
Scope
QC/T 792-2007 is the English-translated version of 电动摩托车和电动轻便摩托车用电机及其控制器技术条件.
QC/T 792-2007 is the Chinese standard "Specifications for motors and controllers of electric motorcycles and electric mopeds".
Its scope clause reads: This standard specifies the product model preparation, requirements, test methods, inspection rules and marking, packaging, transportation and storage requirements of motors (including motors with reducers) and controllers for electric motorcycles and electric mopeds.
This standard is applicable to motors for electric motorcycles and electric mopeds (hereinafter referred to as the “motors”) and their controllers. Its clauses include terms and definitions.
Found what you need?
Document preview — QC/T 792-2007
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Product model preparation
- 5 Requirements
- 6 Test method
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
1 Scope
This standard specifies the product model preparation, requirements, test methods, inspection rules and marking, packaging, transportation and storage requirements of motors (including motors with reducers) and controllers for electric motorcycles and electric mopeds.
This standard is applicable to motors for electric motorcycles and electric mopeds (hereinafter referred to as the “motors”) and their controllers.
2 Normative references
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions, of any of these publications do not apply. However parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition applies.
GB/T 191-2000 Packaging - Pictorial marking for handling of goods
GB 14023-2006 Vehicles, boats and internal combustion engines driven devices - Radio disturbance characteristics - Limits and methods of measurement
GB/T 2423.5 Environmental testing for electric and electronic products - Part 2: Test methods - Test Ea and guidance: Shock
GB/T 2423.10 Environmental testing for electric and electronic products-Part 2: Test methods - Test Fc and guidance: Vibration (sinusoidal)
GB/T 4942.1-2001 Classification of degrees of protection provided by enclosures of rotating electrical machines (IP code)
GB/T 4942.2-1993 Degrees of protection provided by enclosures for low-voltage apparatus
GB/T 5171-2002 General technical requirements for small power motors
GB/T 10069.1-2006 Measurement of airborne noise emitted by rotating electrical machines and the noise limits - Part 1: Method for the measurement of airborne noise emitted by rotating electrical machines
GB/T 13202-1997 Series of motorcycle rims
GB/T 17619-1998 Limits and methods of testing for immunity of electrical/electronic sub-assemblies in vehicles to electromagnetic radiation
GB/T 18387 Limits and test methods of magnetic and electric field strength from electric vehicles - Broadband 9kHz~30MHz
QC/T 413-2002 Basic specifications for automotive electrical equipment
3 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1
integrated wheel with the outer shell of motor integrated motorcycle driving wheel made of the hub and the outer shell of the motor […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download QC/T 792-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 792-2007
$135.00