QC/T 32-2006Test methods for automotive air filters (English PDF)
汽车用空气滤清器试验方法
This is a limited preview
Buy now to download the full PDF (26 pages)
Need quotation for your management?
Get a formal quotation for QC/T 32-2006 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 17, 2006
Implementation date
May 1, 2007
Scope
QC/T 32-2006 is the English-translated version of 汽车用空气滤清器试验方法.
QC/T 32-2006 is the Chinese standard "Test methods for automotive air filters". Its scope clause reads: This standard specifies the laboratory performance test methods of air cleaners for automobiles for the purpose of comparison of the laboratory performance test results.
This standard is applicable to the performance test of air cleaner assembly (hereinafter referred to as assembly) and filter element for automobiles, and for reference by performance test of assembly and filter element for engineering machinery, agricultural and forestry machinery, ships and fixed power. Its clauses include terms, definitions, parameters, symbols and units.
Found what you need?
Document preview — QC/T 32-2006
National Standard of the People's Republic of China
- Replacing
- QC/T 32-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword i
- 1 Scope
- 2 Normative References
- 3 Terms, Definitions, Parameters, Symbols and Units
- 4 Measurement Accuracy and Standard Conditions
- 5 Test Materials and Test Conditions
- 6 Test Equipment
- 7 Performance Test of Dry Air Cleaner Assembly
- 8 Air Flow Resistance Recovery Test of Dry Air Cleaner Assembly
- 9 Oil-bath Air Cleaner Assembly Test
- 10 Assembly Vibration Test
- Annex A (Normative) Calculation for the Rated Air Volume Flow of Air Cleaner
- Annex B (Normative) Test Dust
- Annex C (Normative) Test Device
- Annex D (Normative) Air Volume Flow and Air Flow Resistance Corrections to Standard Conditions
- Annex E (Normative) Test Report Sheet
- Annex F (Normative) Test Results
1 Scope
This standard specifies the laboratory performance test methods of air cleaners for automobiles for the purpose of comparison of the laboratory performance test results.
This standard is applicable to the performance test of air cleaner assembly (hereinafter referred to as assembly) and filter element for automobiles, and for reference by performance test of assembly and filter element for engineering machinery, agricultural and forestry machinery, ships and fixed power.
2 Normative References
The following standards contain provisions which, through reference in this standard, constitute provisions of this standard. For dated references, subsequent amendments (excluding corrections) to, or revisions of, any of these publications do not apply. However, all parties coming to an agreement according to this standard are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. For undated references, the latest edition of the normative document referred to applies.
GB 11122 Diesel Engine Oils
3 Terms, Definitions, Parameters, Symbols and Units
3.1 Terms and definitions
For the purposes of this standard, the following terms and definitions apply.
3.1.1 air filter; air cleaner
device which removes particles suspended in the air as it is drawn in the engine
3.1.2 oil-bath air cleaner
air cleaner which can lead the dusty air to oil bath and make a part of dust adhere to engine oil under the action of inertial force, while the dusty air containing oil mist repasses the filter element and is further filtered, making the dust adhered to filter element return to the oil bath along with the engine oil
3.1.3 dry air cleaner
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 26 pages — is available in the English PDF.
Referenced standards
Cited by
- QC/T 1133-2020Safety elements of air filters for commercial vehicles
- QC/T 1134-2020Test method for water separation of engine intake air
- QC/T 793-2020Air filter for motorcycles and mopeds
- QC/T 1033-2016Air brakes - Technical requirements and bench test methods for external automatic slack adjusters
- QC/T 1008-2015Specifications for fuel tank ventilation filters
- JB/T 11977-2014Specifications of Air Cleaner for Tractor
Similar standards
Editions of QC/T 32
| Edition | Title | Revision | Status |
|---|---|---|---|
| QC/T 32-2006 | Test methods for automotive air filters | current edition | Current |
| QC/T 32-1992 | Test methods for automotive air filters | previous edition | Superseded |
This page sells the current edition, QC/T 32-2006. Earlier editions are listed for reference only.
How to Download QC/T 32-2006
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
QC/T 1005-2026 — Performance requirements and bench test methods for hydraulic solenoid valve assembly of electronic stability control system and antilock brake system of automoive
QC/T 1022-2026 — Technical specifications and test methods of reduction gearbox for battery electric vehicles
QC/T 1041-2026 — Control system of fuel evaporative pollutants from Motorcycles with petrol engine
Secure payment via Stripe
Payments accepted
QC/T 32-2006
$305.00