NB/T 11133-2023Angle sensor for coal mine (English PDF)
矿用倾角传感器
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for NB/T 11133-2023 in 30 minutes.
Issued by
NEA
Level / Type
Industry · Recommended
Issue date
February 6, 2023
Implementation date
August 6, 2023
Scope
NB/T 11133-2023 is the English-translated version of 矿用倾角传感器.
NB/T 11133-2023 is the energy industry standard for the inclination sensors, or angle sensors, used in mines. It covers model designation, explosion-proof type, technical requirements, test methods, inspection rules, marking, packaging, transport and storage.
Environmental testing draws on the GB/T 2423 methods for low temperature, high temperature, alternating damp heat, shock and sinusoidal vibration, while enclosure protection follows the IP code of GB/T 4208 and explosion protection the GB/T 3836 series.
Signal transmission is tied to the coal mine information transmission devices of MT/T 899. The standard applies to tilt sensors installed at measuring workplaces in coal mines, non-coal mines and similar sites, and it defines no terms of its own. Issued on 6 February 2023, it has applied since 6 August 2023.
Found what you need?
Document preview — NB/T 11133-2023
National Standard of the People's Republic of China
- ICS
- 29.260.20
- Classification
- D 98
Issued by: National Energy Administration of the People's Republic of China
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Model Meaning
- 5 Technical requirements
- 6 Test method
- 7 Inspection rules
- 8 Labeling, packaging, transportation and storage
Foreword
This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1. Structure and Drafting Rules for Standardization Documents" drafting.
1 Scope
This document specifies the model designation, explosion-proof type, technical requirements, test methods, inspection rules, marks, packaging, transportation and storage etc.
This document is applicable to mine inclination sensors (hereinafter referred to as inclination sensors) used in measuring workplaces in coal mines, non-coal mines and other fields.
2 Normative references
The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.
GB/T 191 Packaging, storage and transportation icon marks
GB/T 2423.1-2008 Environmental testing for electrical and electronic products - Part 2. Test methods Test A. Low temperature
GB/T 2423.2-2008 Environmental testing for electrical and electronic products - Part 2. Test methods Test B. High temperature
GB/T 2423.4-2008 Environmental testing for electrical and electronic products - Part 2. Test method Test Db. Alternating damp heat (12h 12h cycle)
GB/T 2423.5-2019 Environmental Testing Part 2. Test Methods Test Ea and Guidelines. Shock
GB/T 2423.10-2019 Environmental testing Part 2. Test method Test Fc. Vibration (sinusoidal)
GB/T 3836.1-2021 Explosive atmospheres Part 1. General requirements for equipment
GB/T 3836 (all parts) Explosive atmospheres
GB/T 4208 enclosure protection level (IP code)
GB/T 9969 General Rules for Instructions for Use of Industrial Products
GB/T 10111 Generation of Random Numbers and Its Application in Product Quality Sampling Inspection
GB/T 12173 General electrical equipment for mining
AQ1043 Mining product safety sign identification
MT/T 210 Basic test methods for electrical and electronic products used in coal mine communication, detection and control
MT/T 899 Coal mine information transmission device
3 Terms and Definitions
This document does not have terms and definitions that need to be defined.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.4-2008Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
- GB/T 2423.5-2019Environmental testing - Part 2: Test methods - Test Ea and guidance: Shock
- GB/T 2423.10-2019Environmental testing - Part 2: Test methods - Test Fc: Vibration (sinusoidal)
GB/T 3836 · AQ1043 · MT/T 210 · MT/T 899
Similar standards
How to Download NB/T 11133-2023
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10111-1988 — Methods for random sampling by utilizing dices of random number
GB/T 10111-2008 — Generation of random numbers and procedures applied to sampling inspection for product quality
GB/T 12173-1990 — Mining electrical apparatus for non-hazardous area
Secure payment via Stripe
Payments accepted
NB/T 11133-2023
$240.00