Valid

NB/T 10963-2022Remanufacturing of mining equipment—Management requirements for the use of personal protective equipment (English PDF)

矿用设备再制造个体防护装备使用管理要求

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for NB/T 10963-2022 in 30 minutes.

Issued by

NEA

Level / Type

Industry · Recommended

Issue date

May 13, 2022

Implementation date

November 13, 2022

Scope

NB/T 10963-2022 is the English-translated version of 矿用设备再制造个体防护装备使用管理要求.

NB/T 10963-2022 is the Chinese energy industry standard on managing personal protective equipment for workers who overhaul and remanufacture mining equipment.

It sets the general requirements for employers, the selection of protective equipment and its protective performance, and the use of commonly worn items such as respirators, hearing protectors, safety belts, protective footwear, gloves, helmets and chemical protective clothing.

Training, maintenance, replacement and scrapping of the equipment are also covered, within an occupational health and safety management system following GB/T 45001.

Coal mine equipment overhaul and remanufacturing workshops are the main users, with non-coal mining equipment work able to refer to it. Issued on 13 May 2022, it has applied since 13 November 2022.

Found what you need?

Document preview — NB/T 10963-2022

National Standard of the People's Republic of China

ICS: 25.010
Classification: J 00

Issued by: National Energy Administration of the People's Republic of China

Preface
1 Scope
2 Normative references
3 Terms and Definitions
4 General requirements
5 Personal protective equipment options
6 Protection performance requirements
7 Commonly used personal protective equipment and its use management
8 Management and training
9 Maintenance, replacement and scrapping of personal protective equipment

Foreword

This document is in accordance with the provisions of GB/T 1.1-2020 "Guidelines for Standardization Work Part 1: Structure and Drafting Rules for Standardization Documents" drafting.

1 Scope

This document specifies the basic requirements for the use of personal protective equipment for the maintenance and remanufacturing of mining equipment, the selection of personal protective equipment, and the requirements for protective performance. requirements, selection, and abolishment.

This document is applicable to the overhaul and remanufacture of coal mine equipment, and this document can be referred to for non-coal mine equipment overhaul and remanufacture.

2 Normative references

The contents of the following documents constitute the essential provisions of this document through normative references in the text. Among them, dated references For documents, only the version corresponding to the date is applicable to this document; for undated reference documents, the latest version (including all amendments) is applicable to this document.

GB 2626 Respiratory protection self-priming filter anti-particulate respirator

GB 6095 safety belt

GB/T 18664 Selection, use and maintenance of respiratory protective equipment

GB/T 23466 Selection guide for hearing protectors

GB/T 23468 Code for Safe Use of Fall Protective Equipment

GB/T 24536 Protective Clothing Selection, Use and Maintenance of Chemical Protective Clothing

GB/T 28409 Personal Protective Equipment - Guidelines for Selection, Use and Maintenance of Foot Protective Footwear (Boots)

GB/T 28619 Terminology for remanufacturing

GB/T 29512 Guidelines for the selection, use and maintenance of protective gloves for hand protection

GB/T 30041 Specification for selection of head protection helmets

GB/T 39800.1 Specifications for Personal Protective Equipment - Part 1: General

GB/T 45001 Occupational Health and Safety Management System Requirements and Guidelines for Use

3 Terms and Definitions

The terms and definitions defined in GB/T 28619 apply to this document.

3.1 Personal protective equipment

The general term for various protective products worn, equipped and used by practitioners to defend against physical, chemical, biological and other external factors.

Note: The labor protection articles worn, equipped and used in the production workplace are also called personal protective equipment.

4 General requirements

4.1 Personal protective equipment is provided by the employer. It is an auxiliary and preventive measure to ensure the safety and health of workers. It should not be based on personal protective equipment.

Protective equipment replaces engineering protective facilities and other technical and management measures.

4.2 The remanufacturing enterprise shall establish, implement, maintain and continuously improve the occupational health and safety management system in accordance with the requirements of GB/T 45001, including

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

GB/T 23468 · GB/T 30041 · GB/T 39800.1

Similar standards

NB/T 10958-2022|GB 31420-2025|GB 39800.10-2025|GB 39800.11-2025|GB 39800.12-2025|GB/T 12903-2025

How to Download NB/T 10963-2022

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.