JB/T 9102.6-2013Reciprocating piston compressors - Metallic flat packings - Part 6: Technical requirements for sealing rings and oil wiper rings (English PDF)
往复活塞压缩机 金属平面填料 第6部分：密封圈和刮油圈技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9102.6-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 9102.6-2013 is the English-translated version of 往复活塞压缩机 金属平面填料 第6部分：密封圈和刮油圈技术条件.
JB/T 9102.6-2013 is Part 6 of the recommended Chinese machinery industry standard on metallic flat packings for reciprocating piston compressors, and it holds the technical requirements for the sealing rings and oil wiper rings treated as packing elements.
The part covers those technical requirements, the test methods, the inspection rules, and the provisions for marking, packaging and storage. It sits under the Chinese classification J72 and the international classification 23.140.
Among the standards it quotes are GB/T 1031, GB/T 1176, GB/T 1184, GB/T 2828.1, GB/T 6804 and JB/T 6431. JB/T 9102.6-2013 supersedes JB/T 9102.6-1999 and was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 9102.6-2013
National Standard of the People's Republic of China
- ICS
- 23.140
- Replacing
- JB/T 9102.6-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 9102.6-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 9102.6-1999.
It is one of 11 parts of the JB/T 9102 series.
2 Scope
This standard is Part 6 of the recommended Chinese machinery industry standard on metallic flat packings for reciprocating piston compressors, and it holds the technical requirements for the sealing rings and oil wiper rings treated as packing elements. The part covers those technical requirements, the test methods, the inspection rules, and the provisions for marking, packaging and storage. It sits under the Chinese classification J72 and the international classification 23.140. Among the standards it quotes are GB/T 1031, GB/T 1176, GB/T 1184, GB/T 2828.1, GB/T 6804 and JB/T 6431. JB/T 9102.6-2013 supersedes JB/T 9102.6-1999 and was issued by the Ministry of Industry and Information Technology.
3 Normative references
JB/T 9102.6-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 1031
GB/T 1176
GB/T 1184
GB/T 1801
GB/T 2688
GB/T 2828.1
GB/T 6060.2
GB/T 6804
GB/T 9097.1
GB/T 13384
JB/T 6431
JB/T 7905
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 9102.1-1999 — Part 1: Triple-bevel cut sealing rings
JB/T 9102.1-2013 — Part 1: Three-segment tangent cut sealing rings
JB/T 9102.2-1999 — Part 2: Triple-bevel cut wiper rings
JB/T 9102.2-2013 — Part 2: Three-segment tangent cut oil wiper rings
JB/T 9102.3-1999 — Part 3: Three-segment and six-segment sealing rings
JB/T 9102.3-2013 — Part 3: Three-segment and six-segment sealing rings
JB/T 9102.4-1999 — Part 4: Radially cut wiper rings
JB/T 9102.4-2013 — Part 4: Radial cut oil wiper rings
JB/T 9102.5-1999 — Part 5: Tension springs for sealing rings and wiper rings
JB/T 9102.5-2013 — Part 5: Tension springs for sealing rings and oil wiper rings
Other editions:
JB/T 9102.6-1999 (earlier edition)
6 Classification and status
International classification (ICS): 23.140
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1176Casting copper and copper alloys
- GB/T 1184Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 2688Plain bearings - Technical specification for powder metallurgy bearings
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 6060.2Roughness comparison specimens -- Ground, turned, bored, milled, shaped and planed
GB/T 1801
Cited by
- JB/T 9102.1-2013Reciprocating piston compressors - Metallic flat packings - Part 1: Three-segment tangent cut sealing rings
- JB/T 9102.2-2013Reciprocating piston compressors - Metallic flat packings - Part 2: Three-segment tangent cut oil wiper rings
- JB/T 9102.3-2013Reciprocating piston compressors - Metallic flat packings - Part 3: Three-segment and six-segment sealing rings
- JB/T 9102.4-2013Reciprocating piston compressors - Metallic flat packings - Part 4: Radial cut oil wiper rings
Similar standards
Editions of JB/T 9102.6
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9102.6-2013 | Reciprocating piston compressors - Metallic flat packings - Part 6: Technical requirements for sealing rings and oil wiper rings | current edition | Current |
| JB/T 9102.6-1999 | Reciprocating piston compressors - Metallic flat packings - Part 6: Technical requirements for sealing rings and oil wiper rings | previous edition | Superseded |
This page sells the current edition, JB/T 9102.6-2013. Earlier editions are listed for reference only.
How to Download JB/T 9102.6-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1176-2013 — Casting copper and copper alloys
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
Secure payment via Stripe
Payments accepted
JB/T 9102.6-2013
$105.00