JB/T 9102.4-2013Reciprocating piston compressors - Metallic flat packings - Part 4: Radial cut oil wiper rings (English PDF)
往复活塞压缩机 金属平面填料 第4部分：径向切口刮油圈
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9102.4-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 9102.4-2013 is the English-translated version of 往复活塞压缩机 金属平面填料 第4部分：径向切口刮油圈.
Radial cut oil wiper rings are the subject of JB/T 9102.4-2013, Part 4 of the recommended Chinese machinery industry standard on metallic flat packings for reciprocating piston compressors.
JB/T 9102.4-2013 fixes the classification of these radial cut oil wiper rings, their marking and the requirements they must meet, and its field of application is the radial cut oil wiper ring itself.
The part is classified J72 in the Chinese scheme and 23.140 in the international one. Among the standards it quotes are JB/T 9102.3, JB/T 9102.5 and JB/T 9102.6.
It replaces the earlier edition JB/T 9102.4-1999. The Ministry of Industry and Information Technology issued the document.
Found what you need?
Document preview — JB/T 9102.4-2013
National Standard of the People's Republic of China
- ICS
- 23.140
- Replacing
- JB/T 9102.4-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 9102.4-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 9102.4-1999.
It is one of 11 parts of the JB/T 9102 series.
2 Scope
Radial cut oil wiper rings are the subject of JB/T 9102.4-2013, Part 4 of the recommended Chinese machinery industry standard on metallic flat packings for reciprocating piston compressors. JB/T 9102.4-2013 fixes the classification of these radial cut oil wiper rings, their marking and the requirements they must meet, and its field of application is the radial cut oil wiper ring itself. The part is classified J72 in the Chinese scheme and 23.140 in the international one. Among the standards it quotes are JB/T 9102.3, JB/T 9102.5 and JB/T 9102.6. It replaces the earlier edition JB/T 9102.4-1999. The Ministry of Industry and Information Technology issued the document.
3 Normative references
JB/T 9102.4-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
JB/T 9102.3
JB/T 9102.5
JB/T 9102.6
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 9102.1-1999 — Part 1: Triple-bevel cut sealing rings
JB/T 9102.1-2013 — Part 1: Three-segment tangent cut sealing rings
JB/T 9102.2-1999 — Part 2: Triple-bevel cut wiper rings
JB/T 9102.2-2013 — Part 2: Three-segment tangent cut oil wiper rings
JB/T 9102.3-1999 — Part 3: Three-segment and six-segment sealing rings
JB/T 9102.3-2013 — Part 3: Three-segment and six-segment sealing rings
JB/T 9102.5-1999 — Part 5: Tension springs for sealing rings and wiper rings
JB/T 9102.5-2013 — Part 5: Tension springs for sealing rings and oil wiper rings
JB/T 9102.6-1999 — Part 6: Technical specifications for sealing rings and wiper rings
JB/T 9102.6-2013 — Part 6: Technical requirements for sealing rings and oil wiper rings
Other editions:
JB/T 9102.4-1999 (earlier edition)
6 Classification and status
International classification (ICS): 23.140
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- JB/T 9102.3Reciprocating piston compressors - Metallic flat packings - Part 3: Three-segment and six-segment sealing rings
- JB/T 9102.5Reciprocating piston compressors - Metallic flat packings - Part 5: Tension springs for sealing rings and oil wiper rings
- JB/T 9102.6Reciprocating piston compressors - Metallic flat packings - Part 6: Technical requirements for sealing rings and oil wiper rings
Similar standards
Editions of JB/T 9102.4
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9102.4-2013 | Reciprocating piston compressors - Metallic flat packings - Part 4: Radial cut oil wiper rings | current edition | Current |
| JB/T 9102.4-1999 | Reciprocating piston compressors - Metallic flat packings - Part 4: Radial cut oil wiper rings | previous edition | Superseded |
This page sells the current edition, JB/T 9102.4-2013. Earlier editions are listed for reference only.
How to Download JB/T 9102.4-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 9102.3-1999 — Reciprocating piston compressors - Metallic flat packings - Part 3: Three-segment and six-segment sealing rings
JB/T 9102.3-2013 — Reciprocating piston compressors - Metallic flat packings - Part 3: Three-segment and six-segment sealing rings
JB/T 9102.5-1999 — Reciprocating piston compressors - Metallic flat packings - Part 5: Tension springs for sealing rings and wiper rings
Secure payment via Stripe
Payments accepted
JB/T 9102.4-2013
$165.00