JB/T 9102.1-2013Reciprocating piston compressors - Metallic flat packings - Part 1: Three-segment tangent cut sealing rings (English PDF)
往复活塞压缩机 金属平面填料 第1部分：三斜口密封圈
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 9102.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 9102.1-2013 is the English-translated version of 往复活塞压缩机 金属平面填料 第1部分：三斜口密封圈.
JB/T 9102.1-2013 is Part 1 of the recommended Chinese machinery industry standard on metallic flat packings for reciprocating piston compressors, and it treats three-segment tangent cut sealing rings.
The part sets the classification of these rings, their marking and the requirements they must meet, and it applies to the three-segment tangent cut sealing ring, whose material it also addresses.
Its Chinese classification is J72 and its international classification 23.140. Among the standards it quotes are GB/T 119.1, JB/T 9102.5 and JB/T 9102.6. JB/T 9102.1-2013 replaces the earlier edition JB/T 9102.1-1999, and the issuing agency recorded for it is the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 9102.1-2013
National Standard of the People's Republic of China
- ICS
- 23.140
- Replacing
- JB/T 9102.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 9102.1-2013 was issued by MIIT on 25 April 2013 and has been in force since 1 September 2013.
It replaces the earlier edition JB/T 9102.1-1999.
It is one of 11 parts of the JB/T 9102 series.
2 Scope
This standard is Part 1 of the recommended Chinese machinery industry standard on metallic flat packings for reciprocating piston compressors, and it treats three-segment tangent cut sealing rings. The part sets the classification of these rings, their marking and the requirements they must meet, and it applies to the three-segment tangent cut sealing ring, whose material it also addresses. Its Chinese classification is J72 and its international classification 23.140. Among the standards it quotes are GB/T 119.1, JB/T 9102.5 and JB/T 9102.6. JB/T 9102.1-2013 replaces the earlier edition JB/T 9102.1-1999, and the issuing agency recorded for it is the Ministry of Industry and Information Technology.
3 Normative references
JB/T 9102.1-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 119.1
JB/T 9102.5
JB/T 9102.6
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 9102.2-1999 — Part 2: Triple-bevel cut wiper rings
JB/T 9102.2-2013 — Part 2: Three-segment tangent cut oil wiper rings
JB/T 9102.3-1999 — Part 3: Three-segment and six-segment sealing rings
JB/T 9102.3-2013 — Part 3: Three-segment and six-segment sealing rings
JB/T 9102.4-1999 — Part 4: Radially cut wiper rings
JB/T 9102.4-2013 — Part 4: Radial cut oil wiper rings
JB/T 9102.5-1999 — Part 5: Tension springs for sealing rings and wiper rings
JB/T 9102.5-2013 — Part 5: Tension springs for sealing rings and oil wiper rings
JB/T 9102.6-1999 — Part 6: Technical specifications for sealing rings and wiper rings
JB/T 9102.6-2013 — Part 6: Technical requirements for sealing rings and oil wiper rings
Other editions:
JB/T 9102.1-1999 (earlier edition)
6 Classification and status
International classification (ICS): 23.140
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 119.1Parallel pins, of unhardened steel and austenitic stainless steel
- JB/T 9102.5Reciprocating piston compressors - Metallic flat packings - Part 5: Tension springs for sealing rings and oil wiper rings
- JB/T 9102.6Reciprocating piston compressors - Metallic flat packings - Part 6: Technical requirements for sealing rings and oil wiper rings
Similar standards
Editions of JB/T 9102.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 9102.1-2013 | Reciprocating piston compressors - Metallic flat packings - Part 1: Three-segment tangent cut sealing rings | current edition | Current |
| JB/T 9102.1-1999 | Reciprocating piston compressors - Metallic flat packings - Part 1: Three-segment tangent cut sealing rings | previous edition | Superseded |
This page sells the current edition, JB/T 9102.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 9102.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 119.1-2000 — Parallel pins, of unhardened steel and austenitic stainless steel
JB/T 9102.5-1999 — Reciprocating piston compressors - Metallic flat packings - Part 5: Tension springs for sealing rings and wiper rings
JB/T 9102.5-2013 — Reciprocating piston compressors - Metallic flat packings - Part 5: Tension springs for sealing rings and oil wiper rings
Secure payment via Stripe
Payments accepted
JB/T 9102.1-2013
$165.00