Valid

JB/T 8832-2001General technical requirements for numerical control systems of machine tools (English PDF)

机床数控系统 通用技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 8832-2001 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

September 30, 1998

Implementation date

December 1, 1998

Scope

JB/T 8832-2001 is the English-translated version of 机床数控系统 通用技术条件.

JB/T 8832-2001 is the Chinese machinery industry standard covering general technical requirements for numerical control systems of machine tools. It was issued on 30 September 1998 and has been in force since 1 December 1998, replacing JB/T 8832-1999.

The document is under the responsibility of the Ministry of Industry and Information Technology. This page is published from the official record of the 2001 edition.

The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.

Found what you need?

Document preview — JB/T 8832-2001

National Standard of the People's Republic of China

Replacing
JB/T 8832-1999

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 3.1 Type
  • 3.2 Basic parameters
  • 4 Types and basic parameters
  • 4.1 Types
  • 4.2 Model designation
  • 4.3 Nominal operating conditions
  • 4.4 Safety and hygiene
  • 4.5 Welding
  • 4.6 Bridge (After crane operation mechanism assembled)
  • 4.7 Assembly
  • 4.8 Electrical control equipment
  • 4.9 Steel pretreatment and painting
  • 5 Technical requirements
  • 5.1 General requirements
  • 5.2 Safety requirements
  • 5.3 Cold and hot working forming
  • 5.4 Rated load test
  • 5.5 Whole machine noise test
  • 5.6 Static rigidity test
  • 5.7 Dynamic load test
  • 5.8 Crane span deviation
  • 5.9 Diagonal difference of bridge
  • 6 Test methods
  • 6.1 Exit-factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 7.1 Marking
  • 7.2 Packaging, transportation and storage
  • 7.3 Transportation
  • 7.4 Storage
  • 8 Marking, packaging, transportation and storage
  • 9 标志和标签 9 Marking and labeling

1 Foreword

JB/T 8832-2001 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 September 1998 and has been in force since 1 December 1998.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

The document runs to 15 pages in English translation.

2 Scope Preview

JB/T 8832-2001 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 21,922 other JB/T standards.

Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.

3 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

4 Related standards

Standards on related subjects:

GB 15760-2025 — Metal cutting machines - General specifications for safeguarding

GB/T 9061-2025 — Metal-cutting machine tools - General specifications

GB/T 5900.1-2021 — Machine tools - Connecting dimensions of spindle noses and work holding chucks - Part 1: Conical connection

JB/T 8072-2021 — Machine tools - Presentation of lubrication requirements

JB/T 6609-2021 — Steels and heat treatment for machine tool parts

JB/T 4323-2019 — Water-based metal cleaners

5 Classification and status

Chinese Standard Classification (CCS): J 50

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Cited by

Similar standards

Editions of JB/T 8832

EditionTitleRevisionStatus
JB/T 8832-2001General technical requirements for numerical control systems of machine toolscurrent editionCurrent
JB/T 8832-1999General technical requirements for numerical control systems of machine toolsprevious editionSuperseded

This page sells the current edition, JB/T 8832-2001. Earlier editions are listed for reference only.

How to Download JB/T 8832-2001

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 8832-2001

$255.00