JB/T 6103.2-2017Section bending machines - Part 2: Technical requirements (English PDF)
型材卷弯机 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6103.2-2017 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 9, 2017
Implementation date
July 1, 2017
Scope
JB/T 6103.2-2017 is the English-translated version of 型材卷弯机 第2部分：技术条件.
JB/T 6103.2-2017 is the recommended Chinese machinery industry standard that holds the technical requirements for section bending machines. Besides those requirements it gives the test methods, the inspection rules and the provisions on packaging, marking and transport.
It applies to the section bending machine, referred to in the text as the bending machine. It was issued by the Ministry of Industry and Information Technology under the Chinese classification J62 and the international classification 25.120.10.
Among the standards it quotes are GB/T 3766, GB 5226.1, GB/T 7935, GB/T 9969, GB 17120, GB/T 23281 and JB/T 6103.1.
Found what you need?
Document preview — JB/T 6103.2-2017
National Standard of the People's Republic of China
- ICS
- 25.120.10
- Replacing
- JB/T 8777-1998
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 6103.2-2017 was issued by MIIT on 9 January 2017 and has been in force since 1 July 2017.
It is one of 4 parts of the JB/T 6103 series.
2 Scope
This standard is the recommended Chinese machinery industry standard that holds the technical requirements for section bending machines. Besides those requirements it gives the test methods, the inspection rules and the provisions on packaging, marking and transport. It applies to the section bending machine, referred to in the text as the bending machine. It was issued by the Ministry of Industry and Information Technology under the Chinese classification J62 and the international classification 25.120.10. Among the standards it quotes are GB/T 3766, GB 5226.1, GB/T 7935, GB/T 9969, GB 17120, GB/T 23281 and JB/T 6103.1.
3 Normative references
JB/T 6103.2-2017 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 191
GB/T 3766
GB 5226.1
GB/T 6576
GB/T 7935
GB/T 9969
GB/T 10923
GB/T 13306
GB 17120
GB/T 23281
JB/T 1829
JB/T 3240
JB/T 5775
JB/T 6103.1
JB/T 8356
JB/T 8609
JB/T 8832
JB/T 9954
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6103-1992 — Section bending machines - Types and basic parameters
JB/T 6103.1-2017 — 1: Types and basic parameters
JB/T 6103.3-2020 — 3: Accuracy
6 Classification and status
International classification (ICS): 25.120.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 3766Hydraulic fluid power -- General rules and safety requirements for systems and their components
- GB/T 6576Machine tool -- Lubrication systems
- GB/T 7935Hydraulic fluid power - General requirements for hydraulic components
- GB/T 9969General principles for preparation of instructions for use of industrial products
- GB/T 10923Test code of accuracy for metal forming machine
GB 5226.1
Similar standards
Editions of JB/T 6103.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6103.2-2017 | Section bending machines - Part 2: Technical requirements | current edition | Current |
| JB/T 8777-1998 | Section bending machines - Part 2: Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 6103.2-2017. Earlier editions are listed for reference only.
How to Download JB/T 6103.2-2017
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 17120-2025 — Metalforming machinery - Safety technical specification
GB/T 10923-2009 — Test code of accuracy for metal forming machine
GB/T 13306-2011 — Plates
Secure payment via Stripe
Payments accepted
JB/T 6103.2-2017
$205.00