GB/T 39561.4-2020Interconnection and interoperation of numerical control equipment—Part 4: Object dictionary of numerical control machine tools (English PDF)
数控装备互联互通及互操作 第4部分：数控机床对象字典
This is a limited preview
Buy now to download the full PDF (58 pages)
Need quotation for your management?
Get a formal quotation for GB/T 39561.4-2020 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
December 14, 2020
Implementation date
July 1, 2021
Scope
GB/T 39561.4-2020 is the English-translated version of 数控装备互联互通及互操作 第4部分：数控机床对象字典.
GB/T 39561.4-2020 is the Chinese standard "Interconnection and interoperation of numerical control equipment—Part 4: Object dictionary of numerical control machine tools".
Its scope clause reads: This part of GB/T 39561 specifies the relationship between CNC equipment and CNC equipment, between CNC equipment and production line integration systems, and CNC machine tool object dictionary for interconnection and interoperability between control equipment and upper management system, including general requirements, CNC machine tool object dictionary The structure and modeling rules, the attribute object set of CNC machine tool and the object set of CNC machine tool component: This section applies to the communication interconnection, information exchange and interoperability between CNC machine tools and CNC equipment for intelligent manufacturing:. Its clauses include terms, definitions and abbreviations.
Found what you need?
Document preview — GB/T 39561.4-2020
National Standard of the People's Republic of China
- ICS
- 29.020
- Classification
- J 07
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Preface
- 1 Scope
- 2 Normative references
- 3 Terms, definitions and abbreviations
- 4 General requirements
- 5 The structure and modeling rules of CNC machine tool object dictionary
- 6 CNC machine tool attribute object set
- 7 CNC machine tool component object set
- Appendix A (informative appendix) CNC machine tool extended object set
1 Scope
This part of GB/T 39561 specifies the relationship between CNC equipment and CNC equipment, between CNC equipment and production line integration systems, and
CNC machine tool object dictionary for interconnection and interoperability between control equipment and upper management system, including general requirements, CNC machine tool object dictionary
The structure and modeling rules, the attribute object set of CNC machine tool and the object set of CNC machine tool component:
This section applies to the communication interconnection, information exchange and interoperability between CNC machine tools and CNC equipment for intelligent manufacturing:
2 Normative references
The following documents are indispensable for the application of this document: For dated reference documents, only the dated version applies to this article
Pieces: For undated references, the latest version (including all amendments) applies to this document:
GB/T 39561:2-2020 Interconnection and Interoperability of Numerical Control Equipment Part 2: Equipment Description Model
3 Terms, definitions and abbreviations
3:1 Terms and definitions
The following terms and definitions apply to this document:
3:1:1
Object dictionary objectdictionary
A group of ordered data, each data is addressed by a 16-bit index:
3:1:2
Numerical control machine tools
A machine tool controlled by a CNC system and running in accordance with a CNC program:
Note: The machine tool runs according to instructions and/or commands composed of specific codes and symbol codes of the CNC system program:
3:1:3
Numerical control system
A system that continuously introduces numerical values and/or digital data during operation to realize automatic control of the machining process:
Note: The numerical control system is mainly composed of hardware such as numerical control device, drive device, sensor device, detection device and their corresponding control software:
3:2 Abbreviations
The following abbreviations apply to this document:
CNC: Computer Numerical Control (ComputerNumericalControl)
ID: Identifier
I/O: Input/Output (Input/Output)
PLC: Programmable Logic Controller (ProgrammableLogicControler) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 58 pages — is available in the English PDF.
Referenced standards
Normative references
GB/T 39561
Similar standards
How to Download GB/T 39561.4-2020
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 39561.1-2020 — Interconnection and interoperation of numerical control equipment—Part 1: General technical requirement
GB/T 39561.2-2020 — Interconnection and interoperation of numerical control equipment—Part 2: Device description model
GB/T 39561.3-2020 — Interconnection and interoperation of numerical control equipment—Part 3: Implementation oriented model mapping
Secure payment via Stripe
Payments accepted
GB/T 39561.4-2020
$770.00