JB/T 11053-2010CNC dry turning machines for porcelain insulator blanks (English PDF)
瓷绝缘子干法数控修坯机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11053-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 11053-2010 is the English-translated version of 瓷绝缘子干法数控修坯机.
JB/T 11053-2010 is a recommended Chinese machinery industry standard for the numerically controlled dry trimming machines that shape porcelain insulator blanks.
It lays down the model designation of the machine, its technical requirements, test methods and inspection rules, together with marking, packaging, transportation and storage.
The machine it addresses belongs to the isostatic dry route of electrical porcelain production: slurry made up from raw materials, spray drying, and pressing into a dry blank whose moisture content stays below 1.5%, after which the moulded blank is cut automatically.
Among the standards it quotes are GB/T 191, GB 5226.1, GB/T 13306, GB/T 13384, JB/T 8832 and JB/T 10587. Its Chinese classification is K94 and its international classification 29.100.01.
Found what you need?
Document preview — JB/T 11053-2010
National Standard of the People's Republic of China
- ICS
- 29.100.01
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11053-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the numerically controlled dry trimming machines that shape porcelain insulator blanks. It lays down the model designation of the machine, its technical requirements, test methods and inspection rules, together with marking, packaging, transportation and storage. The machine it addresses belongs to the isostatic dry route of electrical porcelain production: slurry made up from raw materials, spray drying, and pressing into a dry blank whose moisture content stays below 1.5%, after which the moulded blank is cut automatically. Among the standards it quotes are GB/T 191, GB 5226.1, GB/T 13306, GB/T 13384, JB/T 8832 and JB/T 10587. Its Chinese classification is K94 and its international classification 29.100.01.
JB/T 11053-2010 falls under ICS 29.100.01, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 5226.1
GB/T 13306
GB/T 13384
JB/T 8832
JB/T 10587
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 27743-2025 — Inspection method for transformer of special equipment
GB/T 43962.1-2024 — System integration of power battery digital workshop - Part 1: General requirements
6 Classification and status
International classification (ICS): 29.100.01
Chinese Standard Classification (CCS): K 94
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 5226.1Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 13306Plates
- GB/T 13384General specifications for packing of mechanical and electrical product
- JB/T 8832General technical requirements for numerical control systems of machine tools
- JB/T 10587Electrotechnical terminology - Special equipment for electro-ceramics
Similar standards
How to Download JB/T 11053-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 5226.1-2002 — Safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 13306-1991 — Plates
JB/T 11053-2010
$85.00