Valid

JB/T 6990-2010MP type roller-disc coal mills (English PDF)

MP型辊盘式磨煤机

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6990-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 6990-2010 is the English-translated version of MP型辊盘式磨煤机.

JB/T 6990-2010 is a recommended Chinese machinery industry standard for MP roller-disc coal mills. It sets out the types and basic parameters of these mills together with technical requirements, test methods and inspection rules, and it covers marking, packaging, transport and storage.

The standard applies to MP disc-type roller mills used for grinding certain anthracites and bituminous coals and for lignite. It carries Chinese classification D94 and international classification 73.120, and the Ministry of Industry and Information Technology is the issuing body.

Among the standards it quotes are GB/T 1348, GB/T 3768, GB/T 9239.1-2006 and JB/T 7128. It supersedes JB/T 6990-2002.

Found what you need?

Document preview — JB/T 6990-2010

National Standard of the People's Republic of China

ICS
73.120
Replacing
JB/T 6990-2002

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 6990-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.

It replaces the earlier edition JB/T 6990-2002, JB/T 6990-1993.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard for MP roller-disc coal mills. It sets out the types and basic parameters of these mills together with technical requirements, test methods and inspection rules, and it covers marking, packaging, transport and storage. The standard applies to MP disc-type roller mills used for grinding certain anthracites and bituminous coals and for lignite. It carries Chinese classification D94 and international classification 73.120, and the Ministry of Industry and Information Technology is the issuing body. Among the standards it quotes are GB/T 1348, GB/T 3768, GB/T 9239.1-2006 and JB/T 7128. It supersedes JB/T 6990-2002.

JB/T 6990-2010 falls under ICS 73.120, in the field of mining and minerals.

This catalogue holds 265 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 191

GB/T 1348

GB/T 3768

GB/T 9239.1-2006 — Mechanical vibration -- Balance quality requirements for rotors in a constant (rigid) state -- Part 1: Specification and verification of balance tolerances

GB/T 13306

JB/T 5000.2

JB/T 5000.3-2007 — General technical requirements for heavy machinery - Part 3: Weldments

JB/T 5000.6

JB/T 5000.8

JB/T 5000.9

JB/T 5000.10

JB/T 5000.12

JB/T 5000.13

JB/T 7128

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 6990-2002 (earlier edition)

JB/T 6990-1993 (earlier edition)

Standards on related subjects:

JB/T 14329-2021 — Ring-roller micro powder mills

JB/T 9023.1-2019 — Down-the-hole drill rigs - Part 1: Open-pit mining type

GB/T 25708-2010 — Ball mills and rod mills

JB/T 6993-2017 — Single rotor impact crushers

JB/T 6989-2015 — Gyradisc cone crushers

JB/T 6988-2015 — Spring cone crushers

6 Classification and status

International classification (ICS): 73.120

Chinese Standard Classification (CCS): D 94

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 6990

EditionTitleRevisionStatus
JB/T 6990-2010MP type roller-disc coal millscurrent editionCurrent
JB/T 6990-2002MP type roller-disc coal millsprevious editionSuperseded

This page sells the current edition, JB/T 6990-2010. Earlier editions are listed for reference only.

How to Download JB/T 6990-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6990-2010

$165.00