Valid

JB/T 6886-2010Fans - Technical requirements for painting (English PDF)

通风机 涂装技术条件

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 6886-2010 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

February 11, 2010

Implementation date

July 1, 2010

Scope

JB/T 6886-2010 is the English-translated version of 通风机 涂装技术条件.

JB/T 6886-2010 is a recommended Chinese machinery industry standard that deals with the painting of fans. It specifies the technical requirements for painting fan products, the safety and health provisions that go with the work, and the inspection of the coating.

It applies to the painting of general-purpose fans, and fans for special purposes may also use it for reference. Among the standards it quotes are GB/T 1720, GB/T 1732, GB/T 1733, GB 6514, GB/T 8923-1988, GB/T 9754, GB 14443 and JB/T 10214.

The standard replaces JB/T 6886-1993, carries the Chinese classification J72 and the international classification 23.120, and comes from the Ministry of Industry and Information Technology.

Found what you need?

Document preview — JB/T 6886-2010

National Standard of the People's Republic of China

ICS
23.120
Replacing
JB/T 6886-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 6886-2010 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 11 February 2010 and has been in force since 1 July 2010.

It replaces the earlier edition JB/T 6886-1993.

The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

This standard is a recommended Chinese machinery industry standard that deals with the painting of fans. It specifies the technical requirements for painting fan products, the safety and health provisions that go with the work, and the inspection of the coating. It applies to the painting of general-purpose fans, and fans for special purposes may also use it for reference. Among the standards it quotes are GB/T 1720, GB/T 1732, GB/T 1733, GB 6514, GB/T 8923-1988, GB/T 9754, GB 14443 and JB/T 10214. The standard replaces JB/T 6886-1993, carries the Chinese classification J72 and the international classification 23.120, and comes from the Ministry of Industry and Information Technology.

JB/T 6886-2010 falls under ICS 23.120, in the field of fluid systems and general-purpose components.

This catalogue holds 421 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

GB/T 1720

GB/T 1723

GB/T 1726

GB/T 1732

GB/T 1733

GB 6514

GB/T 8923-1988 — Preparation of steel substrates before application of paints and related products -- Visual assessment of surface cleanliness -- Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previ

GB/T 9754

GB 14443

JB/T 10214

4 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 6886-1993 (earlier edition)

Standards on related subjects:

GB/T 4976-2017 — Compressors -- Classification

GB/T 2888-2008 — Methods of noise measurement for fans blowers compressors and roots blowers

JB/T 6887-2022 — Technical specification for iron castings for fans

JB/T 6888-2018 — Cast steel of fan blower and compressor - Technical specification

JB/T 6891-2017 — Silencers for fans - Technical requirements

6 Classification and status

International classification (ICS): 23.120

Chinese Standard Classification (CCS): J 72

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Cited by

Editions of JB/T 6886

EditionTitleRevisionStatus
JB/T 6886-2010Fans - Technical requirements for paintingcurrent editionCurrent
JB/T 6886-1993Fans - Technical requirements for paintingprevious editionSuperseded

This page sells the current edition, JB/T 6886-2010. Earlier editions are listed for reference only.

How to Download JB/T 6886-2010

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 6886-2010

$149.00