JB/T 10281-2014Smoke and Heat Exhaust Fan (English PDF)
消防排烟通风机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10281-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 10281-2014 is the English-translated version of 消防排烟通风机.
JB/T 10281-2014 is a recommended Chinese machinery industry standard for the smoke and heat exhaust fan used against fire. It fixes the requirements for the fan, the test methods used to verify them, the inspection rules and the rules for marking and packaging.
The fans it applies to are those installed in the mechanical exhaust systems of buildings of every kind, where they draw off the smoke a fire produces. The standard replaces JB/T 10281-2001.
Among the standards it quotes are GB/T 1236, GB/T 2888, GB/T 3235, GB/T 13306, GB/T 15114, JB/T 6444, JB/T 6886, JB/T 9101, JB/T 10213, JB/T 10562, JB/T 10820 and GA 211. Its classifications are J72 and 23.120.
Found what you need?
Document preview — JB/T 10281-2014
National Standard of the People's Republic of China
- ICS
- 23.120
- Replacing
- JB/T 10281-2001
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10281-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 10281-2001.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard for the smoke and heat exhaust fan used against fire. It fixes the requirements for the fan, the test methods used to verify them, the inspection rules and the rules for marking and packaging. The fans it applies to are those installed in the mechanical exhaust systems of buildings of every kind, where they draw off the smoke a fire produces. The standard replaces JB/T 10281-2001. Among the standards it quotes are GB/T 1236, GB/T 2888, GB/T 3235, GB/T 13306, GB/T 15114, JB/T 6444, JB/T 6886, JB/T 9101, JB/T 10213, JB/T 10562, JB/T 10820 and GA 211. Its classifications are J72 and 23.120.
JB/T 10281-2014 falls under ICS 23.120, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1236
GB/T 2888
GB/T 3235
GB/T 13306
GB/T 15114
JB/T 6444
JB/T 6886
JB/T 6445
JB/T 8689
JB/T 8690
JB/T 9101
JB/T 10213
JB/T 10214
JB/T 10562
JB/T 10563
JB/T 10820
GA 211
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10281-2001 (earlier edition)
Standards on related subjects:
GB/T 13277.1-2023 — Compressed air - Part 1: Contaminants and purity classes
GB/T 4976-2017 — Compressors -- Classification
JB/T 10563-2006 — General purpose centrifugal fans - Technical requirements
JB/T 11176-2025 — Refrigerated dryer controller (cabinet)
JB/T 10972-2025 — Generally use variable frequency oil-injected screw air compressor
JB/T 10910-2025 — Generally used oil-injected rotary air compressor - Oil and gas separation filter element
6 Classification and status
International classification (ICS): 23.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1236Industrial fan -- Performance testing using standardized airways
- GB/T 2888Methods of noise measurement for fans blowers compressors and roots blowers
- GB/T 3235Basic types sizes parameters and characteristies curve of fans
- GB/T 13306Plates
- GB/T 15114Aluminum alloy die castings
- JB/T 6444General technical requirements for packaging of fans
Similar standards
Editions of JB/T 10281
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10281-2014 | Smoke and Heat Exhaust Fan | current edition | Current |
| JB/T 10281-2001 | Smoke and Heat Exhaust Fan | previous edition | Superseded |
This page sells the current edition, JB/T 10281-2014. Earlier editions are listed for reference only.
How to Download JB/T 10281-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GA 211-1999 — High temperature-resistant test methods for fire fan in smoke-venting system
GA 211-2009 — High temperature-resistant test methods for smoke and heat exhaust ventilators
GB/T 1236-1985 — Test methods of aerodynamic performance for fans
JB/T 10281-2014
$85.00