JB/T 6313.1-2011Braided copper wires for electrical purposes - Part 1: General (English PDF)
电工铜编织线 第1部分：一般规定
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 6313.1-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 6313.1-2011 is the English-translated version of 电工铜编织线 第1部分：一般规定.
JB/T 6313.1-2011 is a recommended Chinese machinery industry standard carrying the general provisions for braided copper wires for electrical purposes. It establishes the product codes, the product marking and the sample, the technical requirements, the inspection rules and the provisions for packaging, transport and storage.
It applies to the braided copper wires used for connections in transmission and distribution equipment and in electrical and electronic equipment and components.
The document is classified K11 in the Chinese system and 29.060.10 in the international one. Among the standards it quotes are GB/T 3953-2009, GB/T 4909.1-2009 and JB/T 8137.1-1999.
Found what you need?
Document preview — JB/T 6313.1-2011
National Standard of the People's Republic of China
- ICS
- 29.060.10
- Replacing
- JB/T 6313.1-1992
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
1 Foreword
JB/T 6313.1-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 6313.1-1992.
It is one of 5 parts of the JB/T 6313 series.
2 Scope
This standard is a recommended Chinese machinery industry standard carrying the general provisions for braided copper wires for electrical purposes. It establishes the product codes, the product marking and the sample, the technical requirements, the inspection rules and the provisions for packaging, transport and storage. It applies to the braided copper wires used for connections in transmission and distribution equipment and in electrical and electronic equipment and components. The document is classified K11 in the Chinese system and 29.060.10 in the international one. Among the standards it quotes are GB/T 3953-2009, GB/T 4909.1-2009 and JB/T 8137.1-1999.
3 Normative references
JB/T 6313.1-2011 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 3953-2009
GB/T 4909.1-2009 — Test methods for bare wires - Part 1: General
GB/T 4910-2009
JB/T 8137.1-1999 — Delivery drums for electric wires and cables - Part 1: General requirements
JB/T 8137.2-1999 — Delivery drums for electric wires and cables - Part 2: All-wood delivery drums
JB/T 8137.3-1999 — Delivery drums for electric wires and cables - Part 3: All-steel corrugated delivery drums
JB/T 8137.4-1999 — Delivery drums for electric wires and cables - Part 4: Steel section composite delivery drums
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 6313.2-1992 — Diagonal braided wires
JB/T 6313.2-2011 — Part 2: Diagonal braided wires
JB/T 6313.3-1992 — Straight braided wires
JB/T 6313.3-2011 — Part 3: Plain braided wires
Other editions:
JB/T 6313.1-1992 (earlier edition)
6 Classification and status
International classification (ICS): 29.060.10
Chinese Standard Classification (CCS): K 13
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 3953-2009Round copper wire for electrical purposes
- GB/T 4909.1-2009Test methods for bare wires - Part 1: General
- GB/T 4910-2009Tinned round copper wire
- JB/T 8137.1-1999Delivery drums for wires and cables - Part 1: General specifications
- JB/T 8137.2-1999Delivery drums for wires and cables - Part 2: Wood delivery drums
- JB/T 8137.3-1999Delivery drums for wires and cables - Part 3: Steel delivery drums with corrugated plate
Similar standards
Editions of JB/T 6313.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 6313.1-2011 | Braided copper wires for electrical purposes - Part 1: General | current edition | Current |
| JB/T 6313.1-1992 | Braided copper wires for electrical purposes - Part 1: General | previous edition | Superseded |
This page sells the current edition, JB/T 6313.1-2011. Earlier editions are listed for reference only.
How to Download JB/T 6313.1-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 3953-2009 — Round copper wire for electrical purposes
GB/T 4909.1-2009 — Test methods for bare wires - Part 1: General
GB/T 4910-2009 — Tinned round copper wire
Secure payment via Stripe
Payments accepted
JB/T 6313.1-2011
$105.00