JB/T 5535-2008Technical requirements for metal contact single key switches (English PDF)
金属触点式单键开关技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 5535-2008 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
June 4, 2008
Implementation date
November 1, 2008
Scope
JB/T 5535-2008 is the English-translated version of 金属触点式单键开关技术条件.
JB/T 5535-2008 is a recommended Chinese machinery industry standard giving the technical conditions for metal contact type single-key switches.
It covers the technical requirements for these switches, the test methods used on them and the inspection rules applied to them, and it goes on to the provisions for marking, packaging, storage and transport.
The standard replaces the 1991 edition, JB/T 5535-1991. It is classified L22 in China and 29.120.40 internationally.
Found what you need?
Document preview — JB/T 5535-2008
National Standard of the People's Republic of China
- ICS
- 29.120.40
- Replacing
- JB/T 5535-1991
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 5535-2008 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 June 2008 and has been in force since 1 November 2008.
It replaces the earlier edition JB/T 5535-1991.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard giving the technical conditions for metal contact type single-key switches. It covers the technical requirements for these switches, the test methods used on them and the inspection rules applied to them, and it goes on to the provisions for marking, packaging, storage and transport. The standard replaces the 1991 edition, JB/T 5535-1991. It is classified L22 in China and 29.120.40 internationally.
JB/T 5535-2008 falls under ICS 29.120.40, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 2423.1-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.3-2006 — Environmental testing for electric and electronic products - Part 2: Testing method - Test Cab: Damp heat, steady state
GB/T 2423.6-1995 — Environmental testing for electric and electronic products - Part 2: Test methods - Test Eb and guidance: Bump
GB/T 2423.22-2002 — Environmental testing - Part 2: Test methods - Test N: Change of temperature
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2829-2002 — Sampling procedures and tables for periodic inspection by attributes (apply to inspection of process stability)
GB/T 5095.2-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 2: General examination, electrical continuity and contact resistance tests, insulation tests and voltage stress tests
GB/T 5095.4-1997 — Electromechanical components for electronic equipment. Basic testing procedures and measuring methods. Part 4: Dynamic stress tests
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 5535-1991 (earlier edition)
Standards on related subjects:
GB/T 17737.100-2018 — Coaxial communication cables -- Part 1-100: Electrical test methods -- General requirements
GB/T 21711.1-2008 — Electromechanical elementary relays -- Part 1: General and safety requirements
JB/T 5451-2008 — General technical requirements for microswitches
6 Classification and status
International classification (ICS): 29.120.40
Chinese Standard Classification (CCS): L 22
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 2423.1-2001Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2423.2-2001Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
- GB/T 2423.3-2006Environmental testing - Part 2: Testing method - Test Cab: Damp heat, steady state
- GB/T 2423.6-1995Environmental testing for electric and electronic products - Part 2: Test methods - Test Eb and guidance: Bump
- GB/T 2423.22-2002Environmental testing - Part 2: Test methods - Test N: Change of temperature
- GB/T 2828.1-2003Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
Similar standards
Editions of JB/T 5535
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 5535-2008 | Technical requirements for metal contact single key switches | current edition | Current |
| JB/T 5535-1991 | Technical requirements for metal contact single key switches | previous edition | Superseded |
This page sells the current edition, JB/T 5535-2008. Earlier editions are listed for reference only.
How to Download JB/T 5535-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 2423.1-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2423.2-2001 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests B: Dry heat
GB/T 2423.22-2002 — Environmental testing - Part 2: Test methods - Test N: Change of temperature
JB/T 5535-2008
$105.00