JB/T 4401-2013Specification for small single-phase synchronous generators for ships (English PDF)
船用小型单相同步发电机技术条件
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4401-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 25, 2013
Implementation date
September 1, 2013
Scope
JB/T 4401-2013 is the English-translated version of 船用小型单相同步发电机技术条件.
JB/T 4401-2013 is a recommended Chinese machinery industry standard holding the specification for small single-phase synchronous generators fitted on ships. It fixes the technical requirements for the generator and for its excitation equipment, the test methods, the inspection rules and the product marking.
The machines it addresses are the small marine single-phase alternating current synchronous generators whose rated capacity falls inside a stated band. Among the standards it quotes are GB 755-2008, GB/T 997-2008, GB/T 2423.4-2008, GB/T 4942.1-2006, GB/T 7094-2002 and GB 10068-2008.
It is classified under K21 in the Chinese system and under 29.160.99 in the international system, and it sits in the mechanical and machinery industry group of Chinese standards.
Found what you need?
Document preview — JB/T 4401-2013
National Standard of the People's Republic of China
- ICS
- 29.160.99
- Replacing
- JB/T 4401.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 4401-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 25 April 2013 and has been in force since 1 September 2013.
It is one of 3 parts of the JB/T 4401 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard holding the specification for small single-phase synchronous generators fitted on ships. It fixes the technical requirements for the generator and for its excitation equipment, the test methods, the inspection rules and the product marking. The machines it addresses are the small marine single-phase alternating current synchronous generators whose rated capacity falls inside a stated band. Among the standards it quotes are GB 755-2008, GB/T 997-2008, GB/T 2423.4-2008, GB/T 4942.1-2006, GB/T 7094-2002 and GB 10068-2008. It is classified under K21 in the Chinese system and under 29.160.99 in the international system, and it sits in the mechanical and machinery industry group of Chinese standards.
JB/T 4401-2013 falls under ICS 29.160.99, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 191
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 997-2008 — Rotating electrical machines - Classification of types of construction, mounting arrangements and terminal box position (IM Code)
GB/T 1958
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB/T 1993-1993 — Cooling methods for rotating electrical machines
GB/T 2423.4-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Db: Damp heat, cyclic (12 h + 12 h cycle)
GB/T 2423.16-2008 — Environmental testing - Part 2: Test methods - Test J and guidance: Mold growth
GB/T 2423.17-2008 — Environmental testing for electric and electronic products - Part 2: Test method - Test Ka: Salt mist
GB/T 2900.25
GB/T 4772.1
GB/T 4831-1984 — Specification for model of rotating electrical machines
GB/T 4942.1-2006 — Degrees of protection provided by the integral design of rotating electrical machines (IP code) - Classification
GB/T 7060-2008 — General specifications for rotary electrical machines in ships
GB/T 7094-2002 — Vibration (sinusoidal) test method for electrical installations in ships
GB 10068-2008
GB/T 10069.1
4 Where this standard sits
It cites 17 standards, among them GB 755-2008, GB/T 997-2008, GB 1971-2006, listed in full above.
It is one part of the JB/T 4401 series, of which this catalogue holds 3 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
6 Related standards
Other parts of this standard:
JB/T 4401.1-1999 — Small single-phase synchronous generators for ships - Technical specifications
JB/T 4401.2-1999 — Small three-phase synchronous generators for ships - Technical specifications
Standards on related subjects:
GB/T 7409.2-2020 — Excitation systems for synchronous machines—Part 2: Models for power system studies
GB/T 7409.1-2008 — Excitation systems for synchronous electrical machines -- Definitions
JB/T 10499-2005 — Guide for design and application of turbine generators under abnormal operating conditions
JB/T 2224-2018 — Technical requirements for large three-phase four-pole synchronous motors
JB/T 1473-2018 — Large three-phase synchronous motors for mine mills - Technical requirements
JB/T 8311-2014 — Specification for Claw Pole Permanent-magnet Synchronous Motors
7 Classification and status
International classification (ICS): 29.160.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB 755-2008Rotating Electrical Machines - Rating and Performance
- GB/T 997-2008Classification of types of construction, mounting arrangements and terminal box position (IM Code) for rotating electrical machines
- GB/T 1958Geometrical Product Specifications(GPS)—Geometrical tolerance—Verification
- GB 1971-2006Rotating Electrical Machines - Terminal Markings and Direction of Rotation
- GB/T 1993-1993Cooling methods for rotating electrical machines
Similar standards
Editions of JB/T 4401
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4401-2013 | Specification for small single-phase synchronous generators for ships | current edition | Current |
| JB/T 4401.1-1999 | Specification for small single-phase synchronous generators for ships | previous edition | Superseded |
This page sells the current edition, JB/T 4401-2013. Earlier editions are listed for reference only.
How to Download JB/T 4401-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 1971-2006 — Rotating Electrical Machines - Terminal Markings and Direction of Rotation
GB 755-2008 — Rotating Electrical Machines - Rating and Performance
GB/T 10069.1-1988 — Measurement of airborne noise emitted by rotating electrical machinery and the noise limits--Engineering method for the measurement of airborne noise
JB/T 4401-2013
$285.00