JB/T 4279.1-1994Verification methods for test instruments and equipment for enamelled winding wires - General (English PDF)
漆包绕组线试验仪器设备检定方法 总则
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4279.1-1994 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 1994
Implementation date
January 1, 1994
Scope
JB/T 4279.1-1994 is the English-translated version of 漆包绕组线试验仪器设备检定方法 总则.
JB/T 4279.1-1994 is the Chinese machinery industry standard covering verification methods for test instruments and equipment for enamelled winding wires - General.
It was issued on 1 January 1994 and has been in force since 1 January 1994, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1994 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4279.1-1994
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 3.1 Type
- 3.2 Basic parameters
- 4 Types and basic parameters
- 4.1 Types
- 4.2 Model designation
- 4.3 Nominal operating conditions
- 4.4 Safety and hygiene
- 4.5 Welding
- 4.6 Bridge (After crane operation mechanism assembled)
- 4.7 Assembly
- 4.8 Electrical control equipment
- 4.9 Steel pretreatment and painting
- 5 Technical requirements
- 5.1 General requirements
- 5.2 Safety requirements
- 5.3 Cold and hot working forming
- 5.4 Rated load test
- 5.5 Whole machine noise test
- 5.6 Static rigidity test
- 5.7 Dynamic load test
- 5.8 Crane span deviation
- 5.9 Diagonal difference of bridge
- 6 Test methods
- 6.1 Exit-factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 7.1 Marking
- 7.2 Packaging, transportation and storage
- 7.3 Transportation
- 7.4 Storage
- 8 Marking, packaging, transportation and storage
- 9 标志和标签 9 Marking and labeling
1 Foreword
JB/T 4279.1-1994 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It is one of 29 parts of the JB/T 4279 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 4279.1-1994 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 4279.2-1994 — DC resistance test apparatus
JB/T 4279.2-2008 — Verification procedure for test equipment of enamelled winding wire - Part 2: DC electrical resistance tester
JB/T 4279.3-1994 — Elongation testers
JB/T 4279.3-2008 — Verification procedure for test equipment of enamelled winding wire - Part 3: Elongation tester
JB/T 4279.4-1994 — Springback testers
JB/T 4279.4-2008 — Verification procedure for test equipment of enamelled winding wires - Part 4: Springback testers
JB/T 4279.5-1994 — Jerk testers
JB/T 4279.5-2008 — Verification procedure for test equipment of enamelled winding wire - Part 5: Jerk tester
JB/T 4279.6-1994 — Peel testers
JB/T 4279.6-2008 — Verification procedure for test equipment of enamelled winding wire - Part 6: Peeling tester
JB/T 4279.7-1994 — Electrically heated forced-ventilation test ovens
JB/T 4279.7-2008 — Verification procedure for test equipment of enamelled winding wires - Part 7: Forced air circulation electric ovens
JB/T 4279.8-1994 — Heat shock breakdown (cut-through) testers
JB/T 4279.8-2008 — Verification procedure for test equipment of enamelled winding wires - Part 8: Softening breakdown testers
JB/T 4279.9-1994 — Unidirectional scrape testers
JB/T 4279.9-2008 — Verification procedure for test equipment of enamelled winding wire - Part 9: Unidirectional scraping tester
JB/T 4279.10-1994 — Solvent resistance testers
JB/T 4279.11-1994 — Breakdown voltage testers
JB/T 4279.11-2008 — Verification procedure for test equipment of enamelled winding wire - Part 11: Breakdown voltage tester
JB/T 4279.12-1994 — Low-voltage continuity testers for enamel coating
JB/T 4279.12-2008 — Verification procedure for test equipment of enamelled winding wires - Part 12: Low-voltage continuity of insulation testers
JB/T 4279.13-1994 — High-voltage continuity testers for enamel coating
JB/T 4279.13-2008 — Verification procedure for test equipment of enamelled winding wires - Part 13: High-voltage continuity of insulation testers
JB/T 4279.14-2008 — Verification procedure for test equipment of enamelled winding wire - Part 14: Solderability tester
JB/T 4279.15-2008 — Verification procedure for test equipment of enamelled winding wires - Part 15: Reciprocating scrape testers
JB/T 4279.16-2008 — Verification procedure for test equipment of enamelled winding wire - Part 16: Static friction coefficient tester
JB/T 4279.17-2008 — Verification procedure for test equipment of enamelled winding wire - Part 17: Dynamic friction coefficient tester
JB/T 4279.18-2008 — Verification procedure for test equipment of enamelled winding wires - Part 18: Refrigerant resistance testers
Other editions:
JB/T 4279.1-2008 (later edition)
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Cited by
- JB/T 4279.11-2008Verification procedure for test equipment of enamelled winding wire - Part 11: Breakdown voltage tester
- JB/T 4279.12-2008Verification procedure for test equipment of enamelled winding wires - Part 12: Low-voltage continuity of insulation testers
- JB/T 4279.13-2008Verification procedure for test equipment of enamelled winding wires - Part 13: High-voltage continuity of insulation testers
- JB/T 4279.14-2008Verification procedure for test equipment of enamelled winding wire - Part 14: Solderability tester
- JB/T 4279.15-2008Verification procedure for test equipment of enamelled winding wires - Part 15: Reciprocating scrape testers
- JB/T 4279.16-2008Verification procedure for test equipment of enamelled winding wire - Part 16: Static friction coefficient tester
Similar standards
How to Download JB/T 4279.1-1994
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4279.2-2008 — Verification procedure for test equipment of enamelled winding wire - Part 2: DC electrical resistance tester
JB/T 4279.2-1994 — Verification methods for test instruments and equipment for enamelled winding wires - DC resistance test apparatus
JB/T 4279.3-2008 — Verification procedure for test equipment of enamelled winding wire - Part 3: Elongation tester
JB/T 4279.1-1994
$150.00