JB/T 4278.10-1993Verification methods for test equipment for rubber and plastic insulated wires and cables - Spark testers (English PDF)
橡皮塑料电线电缆试验仪器设备检定方法 火花试验机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4278.10-1993 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
January 1, 1993
Implementation date
January 1, 1993
Scope
JB/T 4278.10-1993 is the English-translated version of 橡皮塑料电线电缆试验仪器设备检定方法 火花试验机.
JB/T 4278.10-1993 is the Chinese machinery industry standard covering verification methods for test equipment for rubber and plastic insulated wires and cables - Spark testers.
It was issued on 1 January 1993 and has been in force since 1 January 1993, as a first edition. The document is under the responsibility of the Ministry of Industry and Information Technology.
This page is published from the official record of the 1993 edition. The figures, limits and tables the standard contains are those of the document itself, delivered in full with the English translation.
Found what you need?
Document preview — JB/T 4278.10-1993
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative References
- 3 Verification Items and Technical Requirements
- 3.1 Overview
- 3.2 High-voltage power supply
- 3.3 Test electrode
- 3.4 Number of spark breakdowns
- 3.5 Sensitivity
- 3.6 Stability
- 3.7 Guard electrode
- 3.8 Inspection of Test speed
- 4 Verification Instruments
- 5 Verification Method
- 5.1 Verification Items and Verification Procedure
- 5.2 General inspection
- 5.3 Inspection of test electrode
- 5.4 Inspection of guard electrode
- 5.5 Test voltage calibration
- 5.6 Measurement of ripple factor of DC test voltage
- 5.7 Sensitivity test
- 5.8 Stability test
- 6 Verification Results and Handling
1 Foreword
JB/T 4278.10-1993 is issued by Ministry of Industry and Information Technology of the People's Republic of China.
It is one of 28 parts of the JB/T 4278 series.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
JB/T 4278.10-1993 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 21,922 other JB/T standards.
Of the 5,298 JB/T standards that do carry an ICS number, 1,460 (28%) fall under ICS 25, in the field of manufacturing engineering.
3 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
4 Related standards
Other parts of this standard:
JB/T 4278.1-1993 — General
JB/T 4278.1-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 1: General
JB/T 4278.2-1993 — Low temperature impact test apparatus
JB/T 4278.2-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 2: Low temperature impact test device
JB/T 4278.3-1993 — Flexing test apparatus
JB/T 4278.3-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 3: Flexing test device
JB/T 4278.4-1993 — Abrasion test apparatus
JB/T 4278.4-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 4: Abrasion test device
JB/T 4278.5-1993 — DZ-1 test apparatus for vertical burning of single wires and cables
JB/T 4278.5-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 5: Single insulated wire and cable vertical burning test device
JB/T 4278.6-1993 — Natural ventilation heat ageing test chambers
JB/T 4278.6-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 6: Natural ventilation thermal aging test oven
JB/T 4278.7-1993 — Constant temperature water baths
JB/T 4278.7-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 7: Thermostat water bath
JB/T 4278.8-1993 — Verification methods for test instruments and equipment for rubber and plastic insulated wires and cables - Low temperature test chambers
JB/T 4278.8-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 8: Low temperature test oven
JB/T 4278.9-1993 — Oxygen bomb and air bomb ageing test chambers
JB/T 4278.9-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 9: Oxygen bomb, air bomb aging test oven
JB/T 4278.11-2011 — Verification procedure for test equipment of rubber and plastic wires and cables - Part 11: Low temperature bending test device
JB/T 4278.12-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 12: High temperature pressure test device
JB/T 4278.13-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 13: Forced air heat aging test oven
JB/T 4278.14-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 14: Fire-resisting test device
JB/T 4278.15-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 15: Bundle burning test device
JB/T 4278.16-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 16: Smoke density test device
JB/T 4278.17-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 17: Carbon black content test device
JB/T 4278.18-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 18: Copper single insulated wire and cable vertical burning test device
JB/T 4278.19-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 19: Insulation scrape abrasion test device
Other editions:
JB/T 4278.10-2011 (later edition)
5 Classification and status
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
How to Download JB/T 4278.10-1993
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 4278.11-2011 — Verification procedure for test equipment of rubber and plastic wires and cables - Part 11: Low temperature bending test device
JB/T 4278.9-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Oxygen bomb and air bomb ageing test chambers
JB/T 4278.12-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 12: High temperature pressure test device
JB/T 4278.10-1993
$169.00