Valid

JB/T 4278.4-2011Verification procedure for test equipment of rubber plastic wire and cable - Part 4: Abrasion test device (English PDF)

橡皮塑料电线电缆试验仪器设备检定方法 第4部分:耐磨试验装置

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4278.4-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 4278.4-2011 is the English-translated version of 橡皮塑料电线电缆试验仪器设备检定方法 第4部分:耐磨试验装置.

JB/T 4278.4-2011 is part 4 of the Chinese machinery industry recommended standard on verification procedures for the test equipment used on rubber and plastic wire and cable, and it deals with the abrasion test device.

It names the test items and the technical requirements of the apparatus, the instruments used in the verification, the test methods, and the results and their treatment.

Abrasion test devices for braided cord are what it is applied to. The standard falls under Chinese classification K13 and international classification 29.060, and the Ministry of Industry and Information Technology issued it. Its single quoted standard is JB/T 4278.1-2011. It replaces JB/T 4278.4-1993.

Found what you need?

Document preview — JB/T 4278.4-2011

National Standard of the People's Republic of China

ICS
29.060
Replacing
JB/T 4278.4-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 2 Normative references
  • 3 Terms and definitions
  • 4 Technical requirements
  • 4.1 General requirements
  • 4.2 Model designation
  • 6 Test methods
  • 6.1 Factory inspection
  • 6.2 Type inspection
  • 7 Inspection rules
  • 8 Marking, packaging, transportation and storage
  • 8.1 Marking
  • 8.2 Packaging

1 Foreword

JB/T 4278.4-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.

It replaces the earlier edition JB/T 4278.4-1993.

It is one of 28 parts of the JB/T 4278 series.

2 Scope Preview

This standard is part 4 of the Chinese machinery industry recommended standard on verification procedures for the test equipment used on rubber and plastic wire and cable, and it deals with the abrasion test device. It names the test items and the technical requirements of the apparatus, the instruments used in the verification, the test methods, and the results and their treatment. Abrasion test devices for braided cord are what it is applied to. The standard falls under Chinese classification K13 and international classification 29.060, and the Ministry of Industry and Information Technology issued it. Its single quoted standard is JB/T 4278.1-2011. It replaces JB/T 4278.4-1993.

JB/T 4278.4-2011 falls under ICS 29.060, in the field of electrical engineering.

This catalogue holds 619 other JB/T standards in that field.

In this catalogue, JB/T standards carry edition years from 1967 to 2026.

3 Normative references

JB/T 4278.1-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 1: General

4 Where this standard sits

It cites one other standard, JB/T 4278.1-2011, listed in full above.

It is one part of the JB/T 4278 series, of which this catalogue holds 28 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

JB/T 4278.1-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - General

JB/T 4278.1-2011 — Part 1: General

JB/T 4278.2-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Low temperature impact test apparatus

JB/T 4278.2-2011 — Part 2: Low temperature impact test device

JB/T 4278.3-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Flexing test apparatus

JB/T 4278.3-2011 — Part 3: Flexing test device

JB/T 4278.5-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - DZ-1 test apparatus for vertical burning of single wires and cables

JB/T 4278.5-2011 — Part 5: Single insulated wire and cable vertical burning test device

JB/T 4278.6-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Natural ventilation heat ageing test chambers

JB/T 4278.6-2011 — Part 6: Natural ventilation thermal aging test oven

JB/T 4278.7-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Constant temperature water baths

JB/T 4278.7-2011 — Part 7: Thermostat water bath

JB/T 4278.8-1993 — Verification methods for test instruments and equipment for rubber and plastic insulated wires and cables - Low temperature test chambers

JB/T 4278.8-2011 — Part 8: Low temperature test oven

JB/T 4278.9-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Oxygen bomb and air bomb ageing test chambers

JB/T 4278.9-2011 — Part 9: Oxygen bomb, air bomb aging test oven

JB/T 4278.10-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Spark testers

JB/T 4278.10-2011 — Part 10: Spark tester

JB/T 4278.11-2011 — Verification procedure for test equipment of rubber and plastic wires and cables - Part 11: Low temperature bending test device

JB/T 4278.12-2011 — Part 12: High temperature pressure test device

JB/T 4278.13-2011 — Part 13: Forced air heat aging test oven

JB/T 4278.14-2011 — Part 14: Fire-resisting test device

JB/T 4278.15-2011 — Part 15: Bundle burning test device

JB/T 4278.16-2011 — Part 16: Smoke density test device

JB/T 4278.17-2011 — Part 17: Carbon black content test device

JB/T 4278.18-2011 — Part 18: Copper single insulated wire and cable vertical burning test device

JB/T 4278.19-2011 — Part 19: Insulation scrape abrasion test device

Other editions:

JB/T 4278.4-1993 (earlier edition)

Standards on related subjects:

GB/T 5013.1-2008 — Rubber insulated cables of rated voltages up to and including 450/750 V -- Part 1: General requirements

GB/T 3956-2008 — Conductors of insulated cables

7 Classification and status

International classification (ICS): 29.060

Chinese Standard Classification (CCS): K 13

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4278.4

EditionTitleRevisionStatus
JB/T 4278.4-2011Verification procedure for test equipment of rubber plastic wire and cable - Part 4: Abrasion test devicecurrent editionCurrent
JB/T 4278.4-1993Verification procedure for test equipment of rubber plastic wire and cable - Part 4: Abrasion test deviceprevious editionSuperseded

This page sells the current edition, JB/T 4278.4-2011. Earlier editions are listed for reference only.

How to Download JB/T 4278.4-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4278.4-2011

$149.00