Valid

JB/T 4278.6-2011Verification procedure for test equipment of rubber plastic wire and cable - Part 6: Natural ventilation thermal aging test oven (English PDF)

橡皮塑料电线电缆试验仪器设备检定方法 第5部分:单根橡皮塑料电线电缆试验仪器设备检定方法 第6部分:自然通风热老化试验箱

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 4278.6-2011 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

May 18, 2011

Implementation date

August 1, 2011

Scope

JB/T 4278.6-2011 is the English-translated version of 橡皮塑料电线电缆试验仪器设备检定方法 第5部分:单根橡皮塑料电线电缆试验仪器设备检定方法 第6部分:自然通风热老化试验箱.

JB/T 4278.6-2011 is part 6 of the Chinese machinery industry recommended standard on verification procedures for test equipment used on rubber and plastic wire and cable, and it covers the natural ventilation thermal aging test oven.

It gives the test items and the technical requirements of the natural ventilation heat aging chamber, the apparatus used, the test methods and the treatment of the results.

Measurements made inside the working space of natural ventilation chambers for wires and cables are what it applies to. It sits under Chinese classification K13 and international classification 29.060, and was issued by the Ministry of Industry and Information Technology. It quotes JB/T 4278.1-2011, and it supersedes JB/T 4278.6-1993.

Found what you need?

Document preview — JB/T 4278.6-2011

National Standard of the People's Republic of China

ICS
29.060
Replacing
JB/T 4278.6-1993

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • Foreword
  • Scope
  • Normative references
  • About this standard
  • Related standards
  • Classification and status

1 Foreword

JB/T 4278.6-2011 was issued by MIIT on 18 May 2011 and has been in force since 1 August 2011.

It replaces the earlier edition JB/T 4278.6-1993.

It is one of 28 parts of the JB/T 4278 series.

2 Scope

This standard is part 6 of the Chinese machinery industry recommended standard on verification procedures for test equipment used on rubber and plastic wire and cable, and it covers the natural ventilation thermal aging test oven. It gives the test items and the technical requirements of the natural ventilation heat aging chamber, the apparatus used, the test methods and the treatment of the results. Measurements made inside the working space of natural ventilation chambers for wires and cables are what it applies to. It sits under Chinese classification K13 and international classification 29.060, and was issued by the Ministry of Industry and Information Technology. It quotes JB/T 4278.1-2011, and it supersedes JB/T 4278.6-1993.

3 Normative references

JB/T 4278.6-2011 cites the following standards, which apply in full or in part through the references made to them in its clauses.

JB/T 4278.1-2011 — Verification procedure for test equipment of rubber plastic wire and cable - Part 1: General

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other parts of this standard:

JB/T 4278.1-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - General

JB/T 4278.1-2011 — Part 1: General

JB/T 4278.2-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Low temperature impact test apparatus

JB/T 4278.2-2011 — Part 2: Low temperature impact test device

JB/T 4278.3-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Flexing test apparatus

JB/T 4278.3-2011 — Part 3: Flexing test device

JB/T 4278.4-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Abrasion test apparatus

JB/T 4278.4-2011 — Part 4: Abrasion test device

JB/T 4278.5-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - DZ-1 test apparatus for vertical burning of single wires and cables

JB/T 4278.5-2011 — Part 5: Single insulated wire and cable vertical burning test device

JB/T 4278.7-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Constant temperature water baths

JB/T 4278.7-2011 — Part 7: Thermostat water bath

JB/T 4278.8-1993 — Verification methods for test instruments and equipment for rubber and plastic insulated wires and cables - Low temperature test chambers

JB/T 4278.8-2011 — Part 8: Low temperature test oven

JB/T 4278.9-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Oxygen bomb and air bomb ageing test chambers

JB/T 4278.9-2011 — Part 9: Oxygen bomb, air bomb aging test oven

JB/T 4278.10-1993 — Verification methods for test equipment for rubber and plastic insulated wires and cables - Spark testers

JB/T 4278.10-2011 — Part 10: Spark tester

JB/T 4278.11-2011 — and plastic wires and cables - Part 11: Low temperature bending test device

JB/T 4278.12-2011 — Part 12: High temperature pressure test device

JB/T 4278.13-2011 — Part 13: Forced air heat aging test oven

JB/T 4278.14-2011 — Part 14: Fire-resisting test device

JB/T 4278.15-2011 — Part 15: Bundle burning test device

JB/T 4278.16-2011 — Part 16: Smoke density test device

JB/T 4278.17-2011 — Part 17: Carbon black content test device

JB/T 4278.18-2011 — Part 18: Copper single insulated wire and cable vertical burning test device

JB/T 4278.19-2011 — Part 19: Insulation scrape abrasion test device

Other editions:

JB/T 4278.6-1993 (earlier edition)

6 Classification and status

International classification (ICS): 29.060

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

Editions of JB/T 4278.6

EditionTitleRevisionStatus
JB/T 4278.6-2011Verification procedure for test equipment of rubber plastic wire and cable - Part 6: Natural ventilation thermal aging test ovencurrent editionCurrent
JB/T 4278.6-1993Verification procedure for test equipment of rubber plastic wire and cable - Part 6: Natural ventilation thermal aging test ovenprevious editionSuperseded

This page sells the current edition, JB/T 4278.6-2011. Earlier editions are listed for reference only.

How to Download JB/T 4278.6-2011

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Instant delivery (0–9 sec)

    Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Instant delivery (0–9 sec)
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

JB/T 4278.6-2011

$165.00