JB/T 4145.2-2014Floor-type Surface Grinding Machines for Grinding Slideways - Part 2: Specifications (English PDF)
落地导轨磨床 第2部分：技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 4145.2-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
JB/T 4145.2-2014 is the English-translated version of 落地导轨磨床 第2部分：技术条件.
JB/T 4145.2-2014 is a recommended Chinese machinery industry standard covering the specifications of floor-type surface grinding machines used for grinding slideways.
It sets out what is required of their manufacture and of their inspection. The part applies to machines with a maximum grinding width of 800 mm to 1600 mm and a maximum grinding length of 3000 mm to 14000 mm.
It draws on GB 5226.1, GB/T 9061, GB 15760, GB/T 16769, GB/T 23572, GB/T 25373, GB/T 25374, GB/T 25375 and GB/T 25376, on JB 4029, and on the first part of the same series, JB/T 4145.1.
It supersedes JB/T 4145.2-1999. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — JB/T 4145.2-2014
National Standard of the People's Republic of China
- ICS
- 25.080.50
- Replacing
- JB/T 4145.2-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 4145.2-2014 was issued by MIIT on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition JB/T 4145.2-1999.
It is one of 3 parts of the JB/T 4145 series.
2 Scope
JB/T 4145.2-2014 is a recommended Chinese machinery industry standard covering the specifications of floor-type surface grinding machines used for grinding slideways. It sets out what is required of their manufacture and of their inspection. The part applies to machines with a maximum grinding width of 800 mm to 1600 mm and a maximum grinding length of 3000 mm to 14000 mm. It draws on GB 5226.1, GB/T 9061, GB 15760, GB/T 16769, GB/T 23572, GB/T 25373, GB/T 25374, GB/T 25375 and GB/T 25376, on JB 4029, and on the first part of the same series, JB/T 4145.1. It supersedes JB/T 4145.2-1999. Issued on 6 May 2014, it has applied since 1 October 2014.
3 Normative references
JB/T 4145.2-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 5226.1-2008
GB/T 9061-2006
GB 15760-2004
GB/T 16769-2008 — Metal-cutting machine tools -- Measurement method of sound pressure level
GB/T 23572-2009 — Hydraulic system general specifications for metel-cutting machine tools
GB/T 25373-2010 — Metal-cutting machine tools - General specifications of assembling
GB/T 25374-2010 — Metal-cutting machine tools - Measuring method of cleanliness
GB/T 25375-2010 — Metal-cutting machine tools - Check and evaluation for combine surface by miniating
GB/T 25376-2010 — Metal-cutting machine tools - General specifications of machining parts
JB 4029-2000 — Grinding wheel guards for grinding machines - Technical requirements for safety protection
JB/T 4145.1
GB/T 23572-2010
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 4145.1-1999 — Floor-type slideway grinding machines - Testing of accuracy
JB/T 4145.1-2017 — Floor-type surface grinding machines for grinding slideways - Part 1: Testing of the accuracy
Other editions:
JB/T 4145.2-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.080.50
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 9061-2006Metal-cutting machine tools - General specifications
- GB 15760-2004Metal cutting machines - General specifications for safeguarding
- GB/T 16769-2008Metal-cutting machine tools -- Measurement method of sound pressure level
- GB/T 23572-2009Hydraulic system general specifications for metel-cutting machine tools
- GB/T 25373-2010Metal-cutting machine tools - General specifications of assembling
- GB/T 25374-2010Metal-cutting machine tools - Measuring method of cleanliness
GB 5226.1-2008
Similar standards
Editions of JB/T 4145.2
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 4145.2-2014 | Floor-type Surface Grinding Machines for Grinding Slideways - Part 2: Specifications | current edition | Current |
| JB/T 4145.2-1999 | Floor-type Surface Grinding Machines for Grinding Slideways - Part 2: Specifications | previous edition | Superseded |
This page sells the current edition, JB/T 4145.2-2014. Earlier editions are listed for reference only.
How to Download JB/T 4145.2-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 16769-2008 — Metal-cutting machine tools -- Measurement method of sound pressure level
GB/T 23572-2009 — Hydraulic system general specifications for metel-cutting machine tools
GB/T 25373-2010 — Metal-cutting machine tools - General specifications of assembling
Secure payment via Stripe
Payments accepted
JB/T 4145.2-2014
$85.00