GB/T 38042-2019Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance (English PDF)
表面清洁器具 带有或不带有牵引驱动的商用地板处理机性能测试方法
This is a limited preview
Buy now to download the full PDF (37 pages)
Need quotation for your management?
Get a formal quotation for GB/T 38042-2019 in 30 minutes.
Issued by
State Administration for Market Regulation, China National Standardization Administration
Level / Type
National · Recommended
Issue date
October 18, 2019
Implementation date
May 1, 2020
Scope
GB/T 38042-2019 is the English-translated version of 表面清洁器具 带有或不带有牵引驱动的商用地板处理机性能测试方法.
GB/T 38042-2019 is the Chinese standard "Surface cleaning appliances - Floor treatment machines with or without traction drive, for commercial use - Methods of measuring the performance".
Its scope clause reads: This standard lists the characteristics of push and ride scrubbers and sweepers and other floor cleaners in IEC 60335-2-72. Can parameters.
This standard does not apply to the IEC 60312 series. This standard is intended to provide manufacturers with description parameters appropriate to their manuals and literature.
This may include the terms listed in the Terminology section of this standard. All or part of the parameters. When using any of the parameters listed in this standard, it is stated to be measured in accordance with this standard.
Found what you need?
Document preview — GB/T 38042-2019
National Standard of the People's Republic of China
- ICS
- 97.080
- Classification
- Y 62
Issued by: State Administration for Market Regulation, China National Standardization Administration
Contents
- Foreword
- 1 Scope
- 2 Normative references
- 3 Terms and definitions, abbreviations
- 4 General conditions of the test
- 5 working path width
- 6 rotary channel minimum width
- 7 machine through width
- 8 load
- 9 scrubbing platform maximum downward pressure
- 10 scrubbing platform maximum downward pressure
- 11 Squeegee, brush and broom speed
- 12 Floor load and wheel contact maximum pressure
- 13 speed
- 14 noise
- 15 vibration
- 16 solution flow rate
- 17 hopper rated capacity
- 18 Solution tank and recovery tank capacity
- 19 recycling tank drainage time
- 20 Water Cover Test
- 21 battery hour capacity
- 22 Calculate the running time of the battery-powered machine (maximum)
- 23 rated power
- 24 sweeping/wiping machine air volume
- 25 maximum vacuum
- 26 filter area
- 27 Productivity
- Appendix A (Normative) Assessment of wheel contact pressure and ground load on hard floors on floor boards
- Appendix B (informative) Traction battery for cleaning machine
- Appendix C (informative) Actual production efficiency of each scrub setting
1 Scope
This standard lists the characteristics of push and ride scrubbers and sweepers and other floor cleaners in IEC 60335-2-72.
Can parameters. This standard does not apply to the IEC 60312 series.
This standard is intended to provide manufacturers with description parameters appropriate to their manuals and literature. This may include the terms listed in the Terminology section of this standard.
All or part of the parameters. When using any of the parameters listed in this standard, it is stated to be measured in accordance with this standard.
2 Normative references
The following documents are indispensable for the application of this document. For dated references, only dated versions apply to this article.
Pieces. For undated references, the latest edition (including all amendments) applies to this document.
Household vacuum cleaners - Part 1. Dry vacuum cleaner performance test methods (Vacuumcleaners forhouseholduse-Part 1.Dryvacuumcleaners-Methodsformeasuringtheperformance)
Safety of household and similar electrical appliances - Part 1. General requirements (Household and analogue appliances-Safety-Part 1.Generalrequirements)
IEC 60335-1.2010/AMD1.20131)
Safety of household and similar electrical appliances - Part 2-69. Commercial wet and dry vacuum cleaners
Special requirements for power brushes (Household and similarelectricalappliances-Safety-Part 2-69. Particularre-
Requirementsesforwetanddryvacuumcleaners,includingpowerbrush,forcommercialuse)
IEC 60335-2-72 Safety of household and similar electrical appliances - Part 2-72. Commercial lands with or without traction drives
Special requirements for board processors (Household and similarelectricalappliances-Safety-Part 2-72. Particularre-
Requirementsforfloortreatmentmachineswithorwithouttractiondrive,forcommercialuse)
Standard atmospheric specifications for ISO 554 conditioning and/or testing (Standardatmospheresforconditioningand/ortes- ting-Specifications)
ISO 1585 Road Vehicle Engine Test Procedure Net Power (Roadvehicles-Enginetestcode-Netpower)
EN12281 Printing and office paper dry toner imaging process copy paper requirements (Printingandbusinesspaper-
Requirementsforcopypaperfordrytonerimagingprocesses)
SAEJ1349 Engine Power Test Specification for Spark Ignition and Compression Ignition at Installed Net Rated Power (Engine
Powertestcodesparkignitionandcompressionignitionasinstalednetpowerrating)
1) There is a binding version of IEC 60335-1.2013 (Ed5.1), including IEC 60335-1.2010 (Ed5.0) and Addendum 1 (2013).
GB/T 21551.5 | GB/T 38610 | GB/T 23131 | GB/T 38048.6 | GB/T 38048.4 | […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 37 pages — is available in the English PDF.
Referenced standards
Normative references
IEC 60335 · ISO 554 · ISO 1585
How to Download GB/T 38042-2019
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 38042-2019
$295.00