JB/T 3317.1-2013Multi-tool chucking lathes - Part 1: Testing of the accuracy (English PDF)
卡盘多刀车床 第1部分：精度检验
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 3317.1-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 3317.1-2013 is the English-translated version of 卡盘多刀车床 第1部分：精度检验.
JB/T 3317.1-2013 is a recommended Chinese machinery industry standard covering the accuracy testing of multi-tool chucking lathes, which is Part 1 of that series.
It sets out the requirements for the geometric accuracy checks and for the working accuracy checks, and it describes the test methods used for each of them. The machines concerned are multi-tool chucking lathes with a maximum turning diameter over the carriage of 500 mm.
GB/T 17421.1-1998 is quoted by it. It replaces JB/T 3317.1-1999. Chinese classification J53 and international classification 25.080.10 apply, and the issuing body is the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 3317.1-2013
National Standard of the People's Republic of China
- ICS
- 25.080.10
- Replacing
- JB/T 3317.1-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 3317.1-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 3317.1-1999.
It is one of 5 parts of the JB/T 3317 series.
2 Scope
This standard is a recommended Chinese machinery industry standard covering the accuracy testing of multi-tool chucking lathes, which is Part 1 of that series. It sets out the requirements for the geometric accuracy checks and for the working accuracy checks, and it describes the test methods used for each of them. The machines concerned are multi-tool chucking lathes with a maximum turning diameter over the carriage of 500 mm. GB/T 17421.1-1998 is quoted by it. It replaces JB/T 3317.1-1999. Chinese classification J53 and international classification 25.080.10 apply, and the issuing body is the Ministry of Industry and Information Technology.
3 Normative references
JB/T 3317.1-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 17421.1-1998
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other parts of this standard:
JB/T 3317-1993 — Chucking multi-tool lathes - Parameters
JB/T 3317.2-1999 — Chucking multi-tool lathes - Technical specifications
JB/T 3317.2-2013 — 2: Specifications
JB/T 3317.3-2011 — 3: Types and parameters
Other editions:
JB/T 3317.1-1999 (earlier edition)
6 Classification and status
International classification (ICS): 25.080.10
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Similar standards
Editions of JB/T 3317.1
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 3317.1-2013 | Multi-tool chucking lathes - Part 1: Testing of the accuracy | current edition | Current |
| JB/T 3317.1-1999 | Multi-tool chucking lathes - Part 1: Testing of the accuracy | previous edition | Superseded |
This page sells the current edition, JB/T 3317.1-2013. Earlier editions are listed for reference only.
How to Download JB/T 3317.1-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
JB/T 3317.2-2013 — Multi-tool chucking lathes - Part 2: Specifications
JB/T 3317.2-1999 — Chucking multi-tool lathes - Technical specifications
JB/T 3317.3-2011 — Multi-tool chucking lathes - Part 3: Types and parameters
Secure payment via Stripe
Payments accepted
JB/T 3317.1-2013
$349.00