JB/T 2902-2010Water-lubricated reciprocating piston high pressure oxygen compressors - Technical requirements (English PDF)
水润滑往复活塞高压氧气压缩机 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 2902-2010 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
February 11, 2010
Implementation date
July 1, 2010
Scope
JB/T 2902-2010 is the English-translated version of 水润滑往复活塞高压氧气压缩机 技术条件.
JB/T 2902-2010 is a recommended Chinese machinery industry standard setting the technical requirements for water lubricated reciprocating piston high pressure oxygen compressors.
It covers the technical performance and the technical requirements of the machine, the test methods, the inspection rules and the provisions on signs, packaging and storage.
The compressors in its scope are lubricated with distilled water and used for filling cylinders, with suction pressure from 0.0005 MPa to 0.0050 MPa, rated discharge pressure from 14.7 MPa to 16.5 MPa and nominal volume flow not greater than 200 m3/h.
It replaces JB/T 2902-1993 and carries the classification entries J76 and 23.120.
Found what you need?
Document preview — JB/T 2902-2010
National Standard of the People's Republic of China
- ICS
- 23.120
- Replacing
- JB/T 2902-1993
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
1 Foreword
JB/T 2902-2010 was issued by MIIT on 11 February 2010 and has been in force since 1 July 2010.
It replaces the earlier edition JB/T 2902-1993.
2 Scope
This standard is a recommended Chinese machinery industry standard setting the technical requirements for water lubricated reciprocating piston high pressure oxygen compressors. It covers the technical performance and the technical requirements of the machine, the test methods, the inspection rules and the provisions on signs, packaging and storage. The compressors in its scope are lubricated with distilled water and used for filling cylinders, with suction pressure from 0.0005 MPa to 0.0050 MPa, rated discharge pressure from 14.7 MPa to 16.5 MPa and nominal volume flow not greater than 200 m3/h. It replaces JB/T 2902-1993 and carries the classification entries J76 and 23.120.
3 Normative references
JB/T 2902-2010 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB 150-1998
GB 443-1989 — Lubri cating oils for total loss systems L-AN
GB/T 1174-1992
GB/T 3181-2008 — Colour standard for paint film
GB/T 3853-1998
GB/T 3863-2008
GB/T 4980-2003
GB/T 7777-2003
GB/T 9438-1999
GB/T 13306-1991
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 13819-1992
JB/T 6431-1992 — Grey iron castings for positive displacement compressors - Technical specifications
JB/T 6896-2007 — Surface cleanliness of air separation plants
JB/T 6908-2006 — Steel forgings for displacement compressors
JB/T 9104-1999 — Ductile iron castings for positive displacement compressors - Technical specifications
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 2902-1993 (earlier edition)
6 Classification and status
International classification (ICS): 23.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 443-1989Lubri cating oils for total loss systems L-AN
- GB/T 1174-1992Cast bearing alloy
- GB/T 3181-2008Colour standard for paint film
- GB/T 3853-1998Displacement compressors -- Acceptance tests
- GB/T 3863-2008Industrial oxygen
- GB/T 4980-2003Determination of sound level for noise emitted by displacement compressors
GB 150-1998
Similar standards
Editions of JB/T 2902
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 2902-2010 | Water-lubricated reciprocating piston high pressure oxygen compressors - Technical requirements | current edition | Current |
| JB/T 2902-1993 | Water-lubricated reciprocating piston high pressure oxygen compressors - Technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 2902-2010. Earlier editions are listed for reference only.
How to Download JB/T 2902-2010
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 443-1989 — Lubri cating oils for total loss systems L-AN
GB/T 13384-2008 — General specifications for packing of mechanical and electrical product
GB/T 3181-2008 — Colour standard for paint film
Secure payment via Stripe
Payments accepted
JB/T 2902-2010
$169.00