JB/T 1308.7-2011PN 2500 ultrahigh pressure valves and fittings - Part 7: Threaded collars (English PDF)
PN2500超高压阀门和管件 第7部分:螺套
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 1308.7-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 1308.7-2011 is the English-translated version of PN2500超高压阀门和管件 第7部分:螺套.
JB/T 1308.7-2011 is the recommended Chinese machinery industry standard given to threaded collars within the parts on PN 2500 ultrahigh pressure valves and fittings.
It fixes the form of the collar, its dimensions and the technical requirements it has to meet. The collars within its scope are those of forged steel valves of nominal pressure PN 2500 and nominal size DN 3 to DN 15, carrying ethylene, polyethylene and other non-corrosive media.
Among the standards it quotes are GB/T 196, GB/T 197-2003, GB/T 1804, GB/T 3077 and JB/T 1308.2. It carries the Chinese classification J16 and the international classification 23.060.01, and it supersedes the earlier edition JB/T 1308.7-1999.
Found what you need?
Document preview — JB/T 1308.7-2011
National Standard of the People's Republic of China
- ICS
- 23.060.01
- Replacing
- JB/T 1308.7-1999
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 1308.7-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
It replaces the earlier edition JB/T 1308.7-1999.
It is one of 45 parts of the JB/T 1308 series.
2 Scope Preview
This standard is the recommended Chinese machinery industry standard given to threaded collars within the parts on PN 2500 ultrahigh pressure valves and fittings. It fixes the form of the collar, its dimensions and the technical requirements it has to meet. The collars within its scope are those of forged steel valves of nominal pressure PN 2500 and nominal size DN 3 to DN 15, carrying ethylene, polyethylene and other non-corrosive media. Among the standards it quotes are GB/T 196, GB/T 197-2003, GB/T 1804, GB/T 3077 and JB/T 1308.2. It carries the Chinese classification J16 and the international classification 23.060.01, and it supersedes the earlier edition JB/T 1308.7-1999.
JB/T 1308.7-2011 falls under ICS 23.060.01, in the field of fluid systems and general-purpose components.
This catalogue holds 421 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 196
GB/T 197-2003 — General purpose metric screw threads – Tolerances
GB/T 1804
GB/T 3077
JB/T 1308.2
4 Where this standard sits
It cites 5 standards, among them GB/T 197-2003, listed in full above.
It is one part of the JB/T 1308 series, of which this catalogue holds 45 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
JB/T 1308.1-1999 — PN 250 MPa valves - Types and basic parameters
JB/T 1308.1-2011 — PN2500 ultra-high pressure valves and fittings - Part 1: Valve types and basic parameters
JB/T 1308.1-2025 — PN2500 Ultra-high pressure valve and fitting - Part 1: Valve type and basic parameter
JB/T 1308.2-1999 — PN 250 MPa valves, fittings and fasteners - Technical specifications
JB/T 1308.2-2011 — PN2500 ultra-high pressure valves and fittings - Part 2: Valves, fittings and fasteners
JB/T 1308.2-2025 — PN2500 Ultra-high pressure valve and fitting - Part 2: Technical specification
JB/T 1308.3-1999 — PN 250 MPa pipe ends - Types, dimensions and specifications
JB/T 1308.3-2011 — Part 3: Pipe ends
JB/T 1308.3-2026 — PN2500 ultrahigh pressure valves and fittings - Part 3: Flange, fasteners and connections
JB/T 1308.4-1999 — PN 250 MPa necked joints - Types, dimensions and specifications
JB/T 1308.4-2011 — Part 4: Necked joints
JB/T 1308.4-2026 — PN2500 ultrahigh pressure valves and fittings - Part 4: reduced pipe
JB/T 1308.5-1999 — PN 250 MPa socket joints - Types, dimensions and specifications
JB/T 1308.5-2011 — Part 5: Socket joints
JB/T 1308.6-1999 — PN 250 MPa cone gaskets and cone blind gaskets - Types, dimensions and specifications
JB/T 1308.6-2011 — PN2500 ultra-high pressure valves and fittings - Part 6: Conical gaskets and conical blind gaskets
JB/T 1308.8-1999 — PN 250 MPa inner and outer nuts - Types, dimensions and specifications
JB/T 1308.8-2011 — Part 8: Inner and outer nuts
JB/T 1308.9-1999 — PN 250 MPa joint nuts - Types, dimensions and specifications
JB/T 1308.9-2011 — PN2500 ultra-high pressure valves and fittings - Part 9: Union nuts
JB/T 1308.10-1999 — PN 250 MPa outer nuts - Types, dimensions and specifications
JB/T 1308.10-2011 — PN2500 ultra-high pressure valves and fittings - Part 10: Outer nuts
JB/T 1308.11-1999 — PN 250 MPa inner and outer threaded collars - Types, dimensions and specifications
JB/T 1308.11-2011 — PN2500 ultra-high pressure valves and fittings - Part 11: Male-female threaded collars
JB/T 1308.12-1999 — PN 250 MPa positioning rings - Types, dimensions and specifications
JB/T 1308.12-2011 — Part 12: Positioning rings
JB/T 1308.13-1999 — PN 250 MPa flanges - Types, dimensions and specifications
JB/T 1308.13-2011 — Part 13: Flanges
JB/T 1308.14-1999 — PN 250 MPa stud bolts - Types, dimensions and specifications
JB/T 1308.14-2011 — Part 14: Stud bolts
JB/T 1308.15-1999 — PN 250 MPa stepped stud bolts - Types, dimensions and specifications
JB/T 1308.15-2011 — PN2500 ultra-high pressure valves and fittings - Part 15: Stepped stud bolts
JB/T 1308.16-1999 — PN 250 MPa nuts - Types, dimensions and specifications
JB/T 1308.16-2011 — Part 16: Nuts
JB/T 1308.17-1999 — PN 250 MPa reducing pipes - Types, dimensions and specifications
JB/T 1308.17-2011 — PN2500 ultra-high pressure valves and fittings - Part 17: Reducers
JB/T 1308.18-1999 — PN 250 MPa reducing joints - Types, dimensions and specifications
JB/T 1308.18-2011 — PN2500 ultra-high pressure valves and fittings - Part 18: Reducing joints
JB/T 1308.19-1999 — PN 250 MPa equal tees and equal crosses - Types, dimensions and specifications
JB/T 1308.19-2011 — PN2500 ultra-high pressure valves and fittings - Part 19: Equal tees and equal crosses
JB/T 1308.20-1999 — PN 250 MPa reducing tees and reducing crosses - Types, dimensions and specifications
JB/T 1308.20-2011 — PN2500 ultra-high pressure valves and fittings - Part 20: Reducing tees and reducing crosses
JB/T 1308.21-1999 — PN 250 MPa elbows - Types, dimensions and specifications
JB/T 1308.21-2011 — Part 21: Elbows
Other editions:
JB/T 1308.7-1999 (earlier edition)
Standards on related subjects:
GB/T 8464-2023 — Cast iron, copper and stainless steel valves with screwed connections
HG/T 4304-2012 — Corrosion-resistant polyolefin (PO) plastic linings - Technical specifications
JB/T 106-2004 — Valves - Marking and painting
7 Classification and status
International classification (ICS): 23.060.01
Chinese Standard Classification (CCS): J 16
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 196General purpose metric screw threads - Basic dimensions
- GB/T 197-2003General purpose metric screw threads -- Tolerances
- GB/T 1804General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
- GB/T 3077Alloy Structure Steels
- JB/T 1308.2PN2500 Ultra-high pressure valve and fitting - Part 2: Technical specification
Similar standards
Editions of JB/T 1308.7
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 1308.7-2011 | PN 2500 ultrahigh pressure valves and fittings - Part 7: Threaded collars | current edition | Current |
| JB/T 1308.7-1999 | PN 2500 ultrahigh pressure valves and fittings - Part 7: Threaded collars | previous edition | Superseded |
This page sells the current edition, JB/T 1308.7-2011. Earlier editions are listed for reference only.
How to Download JB/T 1308.7-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1804-1992 — General tolerances. Tolerances for linear dimensions without individual tolerance indications
GB/T 1804-2000 — General tolerances - Tolerances for linear and angular dimensions without individual tolerance indications
GB/T 196-1981 — General purpose screw threads--Basic dimensions for diameter from 1 to 600mm
JB/T 1308.7-2011
$149.00