JB/T 12165-2015Halogen-free low-smoke flame-retardant glass fibre tapes for electrical insulation (English PDF)
电气绝缘用无卤低烟阻燃玻璃纤维布带
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 12165-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
April 30, 2015
Implementation date
October 1, 2015
Scope
JB/T 12165-2015 is the English-translated version of 电气绝缘用无卤低烟阻燃玻璃纤维布带.
JB/T 12165-2015 is a recommended Chinese machinery industry standard on halogen-free, low-smoke, flame-retardant glass fibre tape for electrical insulation. It gives terms and definitions, the requirements the tape must satisfy, the test methods, the inspection rules, and the packaging, labelling, transport and storage.
The tape in its field has a glass fibre cloth substrate coated on both faces with a flame-retardant compound that contains a metal hydrate and no halogens such as chlorine or bromine, the coating being baked and cured onto the cloth.
Tape of this kind serves as a flame-retardant and oxygen-barrier wrapping for flame-retardant and fire-resistant cables. Among the standards it quotes are GB/T 5454-1997, several parts of GB/T 7689, GB/T 9914.3-2013, GB/T 17650.2-1998, GB/T 17651.2-1998 and GB/T 19666-2005.
Found what you need?
Document preview — JB/T 12165-2015
National Standard of the People's Republic of China
- ICS
- 29.035.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 12165-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 30 April 2015 and has been in force since 1 October 2015.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard on halogen-free, low-smoke, flame-retardant glass fibre tape for electrical insulation. It gives terms and definitions, the requirements the tape must satisfy, the test methods, the inspection rules, and the packaging, labelling, transport and storage. The tape in its field has a glass fibre cloth substrate coated on both faces with a flame-retardant compound that contains a metal hydrate and no halogens such as chlorine or bromine, the coating being baked and cured onto the cloth. Tape of this kind serves as a flame-retardant and oxygen-barrier wrapping for flame-retardant and fire-resistant cables. Among the standards it quotes are GB/T 5454-1997, several parts of GB/T 7689, GB/T 9914.3-2013, GB/T 17650.2-1998, GB/T 17651.2-1998 and GB/T 19666-2005.
JB/T 12165-2015 falls under ICS 29.035.99, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 5454-1997 — Textiles. Burning behaviour. Oxygen index method
GB/T 7689.1-2013 — Reinforcements -- Test method for woven fabrics -- Part 1: Determination of thickness
GB/T 7689.3-2013 — Reinforcements -- Test method for woven fabrics -- Part 3: Determination of width and length
GB/T 7689.5-2013 — Reinforcements -- Test method for woven fabrics -- Part 5: Determination of glass fibre tensile breaking force and elongation at break
GB/T 9914.3-2013 — The method for reinforcement products -- Part 3: Determination of mass per unit area
GB/T 17650.2-1998 — Test on gases evolved during combustion of materials from cables. Part 2: Determination of degree of acidity of gases by measuring pH and conductivity
GB/T 17651.2-1998 — Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements
GB/T 19666-2005 — Flame retardant and fire resistant wires and cables
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
JB/T 10442.2-2017 — Insulating paper coated with resin binder forming rhombic pattern for electrical purposes - Part 2: Methods of test
GB/T 11026.1-2016 — Electrical insulating materials -- Thermal endurance properties -- Part 1: Ageing procedures and evaluation of test results
GB/T 10581-2006 — Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
JB/T 12174.5-2018 — Heat-shrinkable moulded shapes - Part 5: Semi-rigid highly elastic materials - Material requirements and system performance
JB/T 12174.4-2018 — Heat-shrinkable moulded shapes - Part 4: Semi-rigid highly flame-retardant polyolefin materials - Material requirements and system performance
JB/T 12174.3-2018 — Heat-shrinkable moulded shapes - Part 3: Dimensions
6 Classification and status
International classification (ICS): 29.035.99
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5454-1997Textiles. Burning behaviour. Oxygen index method
- GB/T 7689.1-2013Reinforcements -- Test method for woven fabrics -- Part 1: Determination of thickness
- GB/T 7689.3-2013Reinforcements -- Test method for woven fabrics -- Part 3: Determination of width and length
- GB/T 7689.5-2013Reinforcements -- Test method for woven fabrics -- Part 5: Determination of glass fibre tensile breaking force and elongation at break
- GB/T 9914.3-2013The method for reinforcement products -- Part 3: Determination of mass per unit area
- GB/T 17650.2-1998Test on gases evolved during combustion of materials from cables or optical fiber cables - Part 2: Determination of acidity (by pH measurement) and conductivity
Similar standards
How to Download JB/T 12165-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 17650.2-1998 — Test on gases evolved during combustion of materials from cables. Part 2: Determination of degree of acidity of gases by measuring pH and conductivity
GB/T 17651.2-1998 — Measurement of smoke density of cables burning under defined conditions. Part 2: Test procedure and requirements
GB/T 19666-2005 — Flame retardant and fire resistant wires and cables
JB/T 12165-2015
$149.00