JB/T 11836-2015Flue gas cleaning equipment for hazardous solid waste incineration - Specification for operation and maintenance (English PDF)
危险固体废物焚烧尾气净化设备 运行维护规范
This is a limited preview
Buy now to download the full PDF (16 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11836-2015 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
October 10, 2015
Implementation date
March 1, 2016
Scope
JB/T 11836-2015 is the English-translated version of 危险固体废物焚烧尾气净化设备 运行维护规范.
JB/T 11836-2015 is a recommended Chinese machinery industry standard covering the flue gas cleaning equipment installed on hazardous solid waste incineration plant.
It is written as an operation and maintenance specification: it fixes the terminology and definitions and then works through start-up, running adjustment, operation and maintenance, shutdown, fault analysis and fault handling, operation and maintenance management, and safety.
It is intended for the operation, the maintenance and the management of exhaust gas purification equipment on hazardous solid waste incinerators. Among the standards it quotes are GB 18484-2001, GB/T 19229.2-2011, HJ 515-2009 and JB/T 11263-2012. It was issued by the Ministry of Industry and Information Technology.
Found what you need?
Document preview — JB/T 11836-2015
National Standard of the People's Republic of China
- ICS
- 13.030
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11836-2015 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 10 October 2015 and has been in force since 1 March 2016.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 16 pages in English translation.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard covering the flue gas cleaning equipment installed on hazardous solid waste incineration plant. It is written as an operation and maintenance specification: it fixes the terminology and definitions and then works through start-up, running adjustment, operation and maintenance, shutdown, fault analysis and fault handling, operation and maintenance management, and safety. It is intended for the operation, the maintenance and the management of exhaust gas purification equipment on hazardous solid waste incinerators. Among the standards it quotes are GB 18484-2001, GB/T 19229.2-2011, HJ 515-2009 and JB/T 11263-2012.
JB/T 11836-2015 falls under ICS 13.030, in the field of environment and health protection, safety.
This catalogue holds 172 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB 18484-2001 — Pollution control standard for hazardous wastes incineration
GB/T 19229.2-2011 — Coal-fired flue gas desulphurization equipment - Part 2: Coal-fired dry/semi-dry flue gas desulphurization equipment
DL/T 774
DL/T 1121
DL 5009.1
HJ/T 76
HJ 515-2009 — Technical specifications for the supervision and management to the operation of centralized incineration disposal facilities for hazardous waste (On trial)
JB/T 8471
JB/T 11263-2012 — Dry and semi-dry flue gas desulfurization equipment for coal-fired plants - Operation and maintenance specification
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 16 pages
5 Related standards
Standards on related subjects:
GB/T 38220-2019 — Technical requirements of assessment for high efficiency water pollutants control equipment—Rotary aerator
GB/T 35579-2017 — General specifications of gasoline vapor recovery unit
JB/T 8532-2008 — Pulse jet bag filters
JB/T 11828-2014 — Coal-fired Dry/Semi-dry Flue Gas Desulphurization Equipment - Commissioning Guide
JB/T 11827-2014 — Test method for properties of calcium oxide for dry/semi-dry desulfurization
JB/T 11826-2014 — Technical Specification for Sludge Incineration Treatment of Municipal Wastewater Treatment Plant
6 Classification and status
International classification (ICS): 13.030
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 16 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 18484-2001Standard for pollution control on hazardous waste incineration
- GB/T 19229.2-2011Coal-fired flue gas desulphurization equipment - Part 2: Coal-fired flue gas dry/semi-dry desulphurization equipment
- DL/T 774Overhaul and maintenance code of IC system in thermal power plant
- DL/T 1121Technical specifications of bag filter system for coal-fired power plants
- DL 5009.1Code of safety operation in power engineering construction. Part 1: Steam power
- HJ/T 76Specification and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)
Similar standards
How to Download JB/T 11836-2015
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL 5009.1-1992 — Code of Safety Operation in Power Engineering Construction - Part 1: Steam Power Plants
DL 5009.1-2002 — Code of safety operation in power engineering construction Part 1: Steam power plants
DL 5009.1-2014 — Code of safety operation in power engineering construction. Part 1: Steam power
JB/T 11836-2015
$285.00