JB/T 11263-2012Dry and semi-dry flue gas desulfurization equipment for coal-fired plants - Operation and maintenance specification (English PDF)
燃煤烟气干法/半干法脱硫设备 运行维护规范
This is a limited preview
Buy now to download the full PDF (21 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11263-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 24, 2012
Implementation date
November 1, 2012
Scope
JB/T 11263-2012 is the English-translated version of 燃煤烟气干法/半干法脱硫设备 运行维护规范.
JB/T 11263-2012 is the Chinese standard "Dry and semi-dry flue gas desulfurization equipment for coal-fired plants - Operation and maintenance specification".
Its scope clause reads: This standard specifies the start-up, operational adjustment, inspection and maintenance, shutdown, fault handling and operating safety of dry and semi-dry flue gas desulphurization equipment for coal-fired flue gas.
It applies to the operation and maintenance management of dry and semi-dry flue gas desulphurization equipment for coal-fired flue gas.
Found what you need?
Document preview — JB/T 11263-2012
National Standard of the People's Republic of China
- ICS
- 13.030
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Start-up of the desulphurization equipment
- 5 Operational adjustment of the desulphurization equipment
- 6 Inspection and maintenance during operation of the desulphurization equipment
- 7 Shutdown of the desulphurization equipment
- 8 Analysis and handling of abnormal conditions during operation of the desulphurization equipment
- 9 Operation and maintenance management
- 10 Safety
- Annex A Technical specifications of the main desulphurization equipment (informative)
- Annex B Main design parameters and performance guarantees of the desulphurization equipment (informative)
- Annex C Quality requirements for absorbent, water and compressed air (informative)
- Annex D Periodic inspection and maintenance of the main desulphurization equipment (informative)
- Annex E Analysis and handling of abnormal conditions of the desulphurization equipment (informative)
1 Scope
This standard specifies the start-up, operational adjustment, inspection and maintenance, shutdown, fault handling and operating safety of dry and semi-dry flue gas desulphurization equipment for coal-fired flue gas. It applies to the operation and maintenance management of dry and semi-dry flue gas desulphurization equipment for coal-fired flue gas.
2 Normative references
3 Terms and definitions
4 Start-up of the desulphurization equipment
5 Operational adjustment of the desulphurization equipment
6 Inspection and maintenance during operation of the desulphurization equipment
7 Shutdown of the desulphurization equipment
8 Analysis and handling of abnormal conditions during operation of the desulphurization equipment
9 Operation and maintenance management
10 Safety
Annex A Technical specifications of the main desulphurization equipment (informative)
Annex B Main design parameters and performance guarantees of the desulphurization equipment (informative)
Annex C Quality requirements for absorbent, water and compressed air (informative)
Annex D Periodic inspection and maintenance of the main desulphurization equipment (informative)
Annex E Analysis and handling of abnormal conditions of the desulphurization equipment (informative)
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 21 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 13223Emission standard of air pollutants for thermal power plants
- DL/T 461Guide for operation and the maintenance of electrostatic precipitators for coal-fired power plants
- DL/T 774Overhaul and maintenance code of IC system in thermal power plant
- DL 5009.1Code of safety operation in power engineering construction. Part 1: Steam power
- HJ/T 76Specification and test procedures for continuous emission monitoring systems of flue gas emitted from stationary sources (on trial)
- JB/T 6407Safety technical specification for design, commissioning, operation and maintenance of electrostatic precipitators
Similar standards
How to Download JB/T 11263-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
DL 5009.1-1992 — Code of Safety Operation in Power Engineering Construction - Part 1: Steam Power Plants
DL 5009.1-2002 — Code of safety operation in power engineering construction Part 1: Steam power plants
DL 5009.1-2014 — Code of safety operation in power engineering construction. Part 1: Steam power
JB/T 11263-2012
$375.00