JB/T 11723-2013The electrical control system of numerically controlled turning machines - Technical requirements (English PDF)
数控车床电气控制系统 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11723-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11723-2013 is the English-translated version of 数控车床电气控制系统 技术条件.
JB/T 11723-2013 is a recommended Chinese machinery industry standard written for the electrical control system of numerically controlled turning machines, which it shortens to the electrical system.
It states the requirements for the design, the installation and the testing of that system. Numerically controlled lathes are the machines it applies to. It bears the Chinese classification J50 and the international classification 29.020.
Among the standards it quotes are GB/T 4026-2010, GB 5226.1-2008, GB/T 6477-2008, GB/T 24341-2009, GB/T 26220-2010 and GB/T 26679-2011.
Found what you need?
Document preview — JB/T 11723-2013
National Standard of the People's Republic of China
- ICS
- 29.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11723-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
2 Scope
This standard is a recommended Chinese machinery industry standard written for the electrical control system of numerically controlled turning machines, which it shortens to the electrical system. It states the requirements for the design, the installation and the testing of that system. Numerically controlled lathes are the machines it applies to. It bears the Chinese classification J50 and the international classification 29.020. Among the standards it quotes are GB/T 4026-2010, GB 5226.1-2008, GB/T 6477-2008, GB/T 24341-2009, GB/T 26220-2010 and GB/T 26679-2011.
3 Normative references
JB/T 11723-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 4026-2010
GB 5226.1-2008
GB/T 6477-2008 — Metal-cutting machine tools - Terminology
GB/T 24340-2009 — Graphical symbols for use on electrical diagram of industrial machines
GB/T 24341-2009 — Electrical equipment of industrial machines drawing of electrical diagrams, figure and table
GB/T 26220-2010 — Industrial automation systems and integration - Numerical control of machines - General requirements for numerical control systems
GB/T 26675-2011 — Electrical,electronic and programmable electronic control systems of machine tools - Specification of insulation resistance test
GB/T 26676-2011 — Electrical, electronic and programmable electronic control systems of machine tools - Specification of withstanding voltage test
GB/T 26679-2011 — Electrical,electronic and programmable electronic control systems of machine tools - Specification of the continuity of the protective bonding circuit test
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 29.020
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4026-2010Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
- GB/T 6477-2008Metal-cutting machine tools - Terminology
- GB/T 24340-2009Graphical symbols for use on electrical diagram of industrial machines
- GB/T 24341-2009Electrical equipment of industrial machines drawing of electrical diagrams, figure and table
- GB/T 26220-2010Industrial automation systems and integration - Numerical control of machines - General requirements for numerical control systems
- GB/T 26675-2011Electrical,electronic and programmable electronic control systems of machine tools - Specification of insulation resistance test
GB 5226.1-2008
Similar standards
How to Download JB/T 11723-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24340-2009 — Graphical symbols for use on electrical diagram of industrial machines
GB/T 24341-2009 — Electrical equipment of industrial machines drawing of electrical diagrams, figure and table
GB/T 26220-2010 — Industrial automation systems and integration - Numerical control of machines - General requirements for numerical control systems
Secure payment via Stripe
Payments accepted
JB/T 11723-2013
$235.00