JB/T 11727-2013Electrical control systems of numerically controlled finger jointing machines - Technical requirements (English PDF)
数控木（梳齿）榫开榫机电气控制系统 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11727-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11727-2013 is the English-translated version of 数控木（梳齿）榫开榫机电气控制系统 技术条件.
Numerically controlled finger jointing machines for wood are the subject of JB/T 11727-2013, a recommended Chinese machinery industry standard written for their electrical control system.
The requirements it states are the basic ones for designing, manufacturing and inspecting that system. It covers machines with a rated voltage of no more than AC 1000 V or DC 1500 V. Its Chinese classification is J50 and its international classification 25.080.
Among the standards it quotes are GB/T 4026-2010, GB 5226.1-2008, GB/T 15379, GB/T 15969.1-2007, GB/T 15969.2-2008, GB/T 19660-2005 and GB/T 26676-2011.
Found what you need?
Document preview — JB/T 11727-2013
National Standard of the People's Republic of China
- ICS
- 25.080
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11727-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
2 Scope
Numerically controlled finger jointing machines for wood are the subject of JB/T 11727-2013, a recommended Chinese machinery industry standard written for their electrical control system. The requirements it states are the basic ones for designing, manufacturing and inspecting that system. It covers machines with a rated voltage of no more than AC 1000 V or DC 1500 V. Its Chinese classification is J50 and its international classification 25.080. Among the standards it quotes are GB/T 4026-2010, GB 5226.1-2008, GB/T 15379, GB/T 15969.1-2007, GB/T 15969.2-2008, GB/T 19660-2005 and GB/T 26676-2011.
3 Normative references
JB/T 11727-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 4026-2010
GB 5226.1-2008
GB/T 8870.1-2012 — Automation systems and integration -- Numerical control of machines -- Program format and definitions of address words -- Part 1: Data format for positioning, line motion and contouring control systems
GB/T 15379
GB/T 15969.1-2007 — Programmable controllers -- Part 1: General information
GB/T 15969.2-2008
GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
GB/T 24340-2009 — Graphical symbols for use on electrical diagram of industrial machines
GB/T 24341-2009 — Electrical equipment of industrial machines drawing of electrical diagrams, figure and table
GB/T 26675-2011 — Electrical,electronic and programmable electronic control systems of machine tools - Specification of insulation resistance test
GB/T 26676-2011 — Electrical, electronic and programmable electronic control systems of machine tools - Specification of withstanding voltage test
GB/T 26679-2011 — Electrical,electronic and programmable electronic control systems of machine tools - Specification of the continuity of the protective bonding circuit test
4 About this standard
Issued by: MIIT
English translation: about 15 pages
5 Classification and status
International classification (ICS): 25.080
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 4026-2010Basic and safety principles for man-machine interface, marking and identification - Identification of equipment terminals, conductor terminations and conductors
- GB/T 8870.1-2012Automation systems and integration -- Numerical control of machines -- Program format and definitions of address words -- Part 1: Data format for positioning, line motion and contouring control systems
- GB/T 15379Woodworking machines - Vocabulary
- GB/T 15969.1-2007Programmable controllers -- Part 1: General information
- GB/T 15969.2-2008Programmable controllers - Part 2: Equipment requirements and tests
- GB/T 19660-2005Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
GB 5226.1-2008
Similar standards
How to Download JB/T 11727-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15379-2025 — Woodworking machines - Vocabulary
GB/T 15969.1-2007 — Programmable controllers -- Part 1: General information
GB/T 19660-2005 — Industrial automation systems and integration -- Numerical control of machines -- Coordinate system and motion nomenclature
Secure payment via Stripe
Payments accepted
JB/T 11727-2013
$225.00