GB/T 6477-2008Metal-cutting machine tools - Terminology (English PDF)
金属切削机床 术语
This is a limited preview
Buy now to download the full PDF (166 pages)
Need quotation for your management?
Get a formal quotation for GB/T 6477-2008 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
August 11, 2008
Implementation date
February 1, 2009
Scope
GB/T 6477-2008 is the English-translated version of 金属切削机床 术语.
GB/T 6477-2008 is the Chinese standard "Metal-cutting machine tools - Terminology".
Its scope clause reads: This standard specifies the general terms of metal cutting machine tools, lathes, milling, drilling, boring, grinding, gear cutting machines, thread processing machine Beds, planer and slotting, broaching, sawing machine, combined machine tools and automatic combination of the line, groove machine, pipe machine tools, machine tool accessories, sports, parameters, Terms and definitions of components and processing methods.
This standard applies to general purpose metal cutting machine (hereinafter referred to as the machine). Its clauses include basic terms and definitions.
Found what you need?
Document preview — GB/T 6477-2008
National Standard of the People's Republic of China
- ICS
- 25.080.01
- Classification
- J 50
- Replacing
- GB/T 6477.6-1986
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- Introduction
- 1 Scope
- 2 Basic terms and definitions
- 3 Terms and definitions 17 lathe
- 4 Milling terms and definitions
- 5 drilling terms and definitions
- 6 boring terms and definitions
- 7 grinder terms and definitions
- 8 gear cutting machines terms and definitions
- 9 thread processing machinery 113 terms and definitions
- 10 planer and slotting Terms and Definitions
- 13 combination machine tools and automatic line combination of terms and definitions
- 14 Marking Machine Terms and Definitions
- 15 tube processing machine 147 terms and definitions
- Appendix A (informative) The main difference between this standard and GB/T 6477-1986 control
1 Scope
This standard specifies the general terms of metal cutting machine tools, lathes, milling, drilling, boring, grinding, gear cutting machines, thread processing machine
Beds, planer and slotting, broaching, sawing machine, combined machine tools and automatic combination of the line, groove machine, pipe machine tools, machine tool accessories, sports, parameters,
Terms and definitions of components and processing methods.
This standard applies to general purpose metal cutting machine (hereinafter referred to as the machine).
2 Basic terms and definitions
2.1 General terms
2.1.1
The geometry of the cutting, special processing method is mainly used for machining metal parts, so as to obtain the required dimensional accuracy and surface quality
Machine (except portable) amount.
2.1.2
Several kinds of artifacts, to complete a variety of steps broad range of machine tools.
2.1.3
Similar in shape and machining workpieces of different sizes for a particular process.
2.1.4
Machining specific workpieces specific processes.
2.1.5
In general components based, together with a small amount of special components on one or several of the workpiece in a predetermined step of processing machines.
2.1.6
The main car shaving machine tools rotating surface of the workpiece. Workpiece rotation movement based, mobile tools to feed movement.
2.1.7
The main processing a variety of tools on the workpiece surface with a cutter. Typically, the main movement of the rotary cutter, the workpiece or move (and) for milling into
To the motion.
2.1.8 Mainly used in the workpiece machining drill holes
Bit rotation based movement, axial movement of the drill feed movement.
2.1.9
The main processing machine pre-existing hole in a workpiece with a boring tool. Typically, the boring tool rotation-based movement, boring tool, or (and) to move the workpiece
Feed movement.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 166 pages — is available in the English PDF.
Referenced standards
Cited by
- GB/T 14896.1-2025Non-traditional machines - Terminology - Part 1: Basic terminology
- GB/T 4019-2025Test conditions for box type vertical drilling machines - Testing of the accuracy
- GB/T 4681-2025External cylindrical centreless grinding machines - Testing of the accuracy
- GB/T 40735-2021Method for inherent energy efficiency evaluation of computer numerical control machine tools
- GB/T 40799-2021Machining process—Test methods for essential energy efficiency data
- GB/T 40803-2021Machining process—Method for energy efficiency evaluation
Similar standards
Editions of GB/T 6477
| Edition | Title | Revision | Status |
|---|---|---|---|
| GB/T 6477-2008 | Metal-cutting machine tools - Terminology | current edition | Current |
| GB/T 6477.6-1986 | Metal-cutting machine tools - Terminology | previous edition | Superseded |
This page sells the current edition, GB/T 6477-2008. Earlier editions are listed for reference only.
How to Download GB/T 6477-2008
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
Secure payment via Stripe
Payments accepted
GB/T 6477-2008
$2,900.00