Valid

JB/T 11618-2013Gear ring-type small tooth difference reducers (English PDF)

齿轮连环少齿差减速器

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for JB/T 11618-2013 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 31, 2013

Implementation date

July 1, 2014

Scope

JB/T 11618-2013 is the English-translated version of 齿轮连环少齿差减速器.

Reducers of the linked gear, small tooth difference kind are the subject of JB/T 11618-2013, a recommended standard of the Chinese machinery industry.

It sets the terms and definitions for this gearing, the types, the model designation and naming, the basic parameters and sizes, the technical requirements, the test methods and the inspection rules, and it ends with marking, packaging, transportation and storage.

Its Chinese classification is J19 and its international classification 21.120. Among the standards it quotes are GB/T 3478.1-2008, GB 5903-2011, GB/T 10095.1-2008, GB/Z 18620.4-2008 and JB/T 8831.

Found what you need?

Document preview — JB/T 11618-2013

National Standard of the People's Republic of China

ICS: 21.120

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Foreword
Scope
Normative references
About this standard
Classification and status

1 Foreword

JB/T 11618-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.

2 Scope

Reducers of the linked gear, small tooth difference kind are the subject of JB/T 11618-2013, a recommended standard of the Chinese machinery industry. It sets the terms and definitions for this gearing, the types, the model designation and naming, the basic parameters and sizes, the technical requirements, the test methods and the inspection rules, and it ends with marking, packaging, transportation and storage. Its Chinese classification is J19 and its international classification 21.120. Among the standards it quotes are GB/T 3478.1-2008, GB 5903-2011, GB/T 10095.1-2008, GB/Z 18620.4-2008 and JB/T 8831.

3 Normative references

JB/T 11618-2013 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 191

GB/T 700-2006 — Carbon structural steels

GB/T 3077-1999

GB/T 3478.1-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities

GB/T 3478.2-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 2: 30-degreepressure angle dimensions tables

GB 5903-2011 — Gear oils for industrial enclosed gear system

GB/T 6404.1

GB/T 6404.2

GB/T 9439-2010

GB/T 10095.1-2008

GB/T 10095.2-2008

GB/T 13306

GB/T 13384

GB/Z 18620.4-2008 — Cylindrical gears - Code of inspection practice - Part 4: Reommendations relative to surface texture and tooth contact pattern checking

JB/T 8831

JB/T 9050.3

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Classification and status

International classification (ICS): 21.120

Prefix JB/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Normative references

Similar standards

JB/T 12915-2016|JB/T 11619-2013|GB/T 30819-2024|GB/T 34884-2017|GB/T 14230-2021|GB/T 6316-2008

How to Download JB/T 11618-2013

1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.