JB/T 11619-2013QDX Point-line meshing gear reducers (English PDF)
QDX点线啮合齿轮减速器
This is a limited preview
Buy now to download the full PDF (24 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11619-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 11619-2013 is the English-translated version of QDX点线啮合齿轮减速器.
JB/T 11619-2013 is the Chinese machinery industry standard for QDX point-line meshing gear reducers.
It sets out the types of this reducer, the basic parameters of the models and their sizes, the requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage, and its field of application is the QDX point-line meshing gear reducer itself.
Chinese classification J19 and international classification 21.120 are recorded. Among the standards it quotes are GB/T 191, GB/T 1031, GB/T 1095, GB/T 1184-1996, GB/T 1356, GB/T 1357, GB/T 1801-2009, GB/T 3077, GB/T 3480.5-2008, GB/T 3811, GB/T 6402 and GB/T 10095.1-2008.
Found what you need?
Document preview — JB/T 11619-2013
National Standard of the People's Republic of China
- ICS
- 21.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Classification and status
1 Foreword
JB/T 11619-2013 was issued by MIIT on 31 December 2013 and has been in force since 1 July 2014.
2 Scope
This standard is the Chinese machinery industry standard for QDX point-line meshing gear reducers. It sets out the types of this reducer, the basic parameters of the models and their sizes, the requirements, the test methods, the inspection rules and the provisions for marking, packaging and storage, and its field of application is the QDX point-line meshing gear reducer itself. Chinese classification J19 and international classification 21.120 are recorded. Among the standards it quotes are GB/T 191, GB/T 1031, GB/T 1095, GB/T 1184-1996, GB/T 1356, GB/T 1357, GB/T 1801-2009, GB/T 3077, GB/T 3480.5-2008, GB/T 3811, GB/T 6402 and GB/T 10095.1-2008.
3 Normative references
JB/T 11619-2013 cites a number of standards, which apply in full or in part through the references made to them in its clauses. Those listed below are the ones the catalogue record shows; the record cuts the list short, so it may not be complete.
GB/T 191
GB/T 1031
GB/T 1095
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
GB/T 1356
GB/T 1357
GB/T 1801-2009
GB/T 3077
GB/T 3478.1-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 1: Generalities
GB/T 3478.2-2008 — Straight cylindrical involute splines -- Metric module, side fit -- Part 2: 30-degreepressure angle dimensions tables
GB/T 3480.5-2008
GB/T 3785.1-2010
GB/T 3785.2-2010
GB/T 3811
GB/T 6402
GB/T 6404.1
GB/T 9439-2010
GB/T 10095.1-2008
4 About this standard
Issued by: MIIT
English translation: about 24 pages
5 Classification and status
International classification (ICS): 21.120
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 24 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191Graphical symbols marking for handling and storage of packages
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 1095Square and Rectangular keyways
- GB/T 1184-1996Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
- GB/T 1356Cylindrical gears for general and heavy engineering -- Standard basic rack tooth profile
- GB/T 1357Cylindrical gears for general engineering and for heavy engineering -- Modules
GB/T 1801-2009
Similar standards
How to Download JB/T 11619-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 1095-2003 — Square and Rectangular keyways
GB/T 1184-1996 — Geometrical tolerancing. Geometrical tolerance for features without individual tolerance indications
Secure payment via Stripe
Payments accepted
JB/T 11619-2013
$720.00