JB/T 11082-2011Internal combustion engines - Surface finishing for parts - Specifications (English PDF)
内燃机 零部件表面光整加工 技术条件
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 11082-2011 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 18, 2011
Implementation date
August 1, 2011
Scope
JB/T 11082-2011 is the English-translated version of 内燃机 零部件表面光整加工 技术条件.
The surface finishing of internal combustion engine parts is specified in JB/T 11082-2011, a recommended Chinese machinery industry standard.
It gives terms and definitions, the finishing equipment, the finishing media, the condition and requirements of part surfaces before finishing, the technical requirements for finishing, the test methods, the treatment after finishing, the inspection rules, and marking, packaging, transport and storage.
JB/T 11082-2011 applies to the surface finishing of metal parts for internal combustion engines, and it notes that metal parts in other industries may also refer to it.
Its classification codes are J90 and 27.020. Among the standards it quotes are GB/T 1031, GB/T 2481.1, GB/T 3505, GB/T 4740, GB/T 15757 and JB/T 11083.
Found what you need?
Document preview — JB/T 11082-2011
National Standard of the People's Republic of China
- ICS
- 27.020
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 11082-2011 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 18 May 2011 and has been in force since 1 August 2011.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
The surface finishing of internal combustion engine parts is specified in JB/T 11082-2011, a recommended Chinese machinery industry standard. It gives terms and definitions, the finishing equipment, the finishing media, the condition and requirements of part surfaces before finishing, the technical requirements for finishing, the test methods, the treatment after finishing, the inspection rules, and marking, packaging, transport and storage. JB/T 11082-2011 applies to the surface finishing of metal parts for internal combustion engines, and it notes that metal parts in other industries may also refer to it. Its classification codes are J90 and 27.020. Among the standards it quotes are GB/T 1031, GB/T 2481.1, GB/T 3505, GB/T 4740, GB/T 15757 and JB/T 11083.
JB/T 11082-2011 falls under ICS 27.020, in the field of energy and heat transfer engineering.
This catalogue holds 276 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1031
GB/T 2476
GB/T 2481.1
GB/T 2481.2
GB/T 2484
GB/T 2490
GB/T 2997
GB/T 3505
GB/T 3810.5
GB/T 3821
GB/T 4740
GB/T 4742
GB/T 15757
GB/T 23339
JB/T 10153
JB/T 11083
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 7184-2023 — Reciprocating internal combustion engines - Evaluation method of vibration
JB/T 9752.3-2014 — Turbochargers - Part 3: Balance Quality Requirements and Check Methods of Rotors
JB/T 6729-2007 — Internal combustion engines - Magnetic particle testing of crankshafts and camshafts
JB/T 14795-2024 — Requirements for prohibited substances on internal combustion engines
JB/T 14238-2023 — Technical specification for green design product assessment - Diesel engine
JB/T 11083-2011 — Finishing machines for internal combustion engine parts
6 Classification and status
International classification (ICS): 27.020
Chinese Standard Classification (CCS): J 90
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1031Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
- GB/T 2476Conventional abrasive — Symbols
- GB/T 2481.1Bonded abrasives - Determination and designation of grain size distribution - Part 1: Macrogrits F4 to F220
- GB/T 2481.2Bonded abrasives - Determination and designation of grain size distribution - Part 2: Microgrits
- GB/T 2484Bonded abrasive products - Shape types, designation and marking
- GB/T 2490Bonded abrasive products—Hardness grade measurement
Similar standards
How to Download JB/T 11082-2011
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1031-1995 — Surface ronghness parameters and their values
GB/T 1031-2009 — Geometrical product specifications(GPS) - Surface texture: Profile method - Surface roughness parameters and their values
GB/T 15757-1995 — Surface defect--Terms
JB/T 11082-2011
$205.00