JB/T 10364-2014Hydraulic fluid power - Check valves (English PDF)

1 Foreword

JB/T 10364-2014 was issued by MIIT on 9 July 2014 and has been in force since 1 November 2014.

It replaces the earlier edition JB/T 10364-2002.

2 Scope

This standard is a recommended Chinese machinery industry standard for the check valves of hydraulic fluid power systems, the ordinary type among them. It fixes their basic parameters and the technical requirements they must meet, and it sets out test methods, inspection rules and packaging requirements. The valves it addresses are of the pipe connected kind. The Ministry of Industry and Information Technology issued the document, which sits under the classifications J20 and 23.100.50. Among the standards it quotes are GB/T 786.1, GB/T 2346, GB/T 2514, GB/T 8100, GB/T 17489 and JB/T 2184. It replaces JB/T 10364-2002.

3 Normative references

JB/T 10364-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.

GB/T 786.1

GB/T 2346

GB/T 2514

GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)

GB/T 7935-2005 — Hydraulic fluid power - General requirements for hydraulic components

GB/T 8100

GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles

GB/T 17446

GB/T 17489

JB/T 2184

JB/T 7858

4 About this standard

Issued by: MIIT

English translation: about 15 pages

5 Related standards

Other editions:

JB/T 10364-2002 (earlier edition)

6 Classification and status

International classification (ICS): 23.100.50

Prefix JB/T: recommended standard.