JB/T 10365-2014Hydraulic fluid power - Solenoid operated directional control valves (English PDF)
液压电磁换向阀
This is a limited preview
Buy now to download the full PDF (20 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10365-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 9, 2014
Implementation date
November 1, 2014
Scope
JB/T 10365-2014 is the English-translated version of 液压电磁换向阀.
JB/T 10365-2014 is a recommended Chinese machinery industry standard for the solenoid operated directional control valves of hydraulic fluid power systems. It fixes the basic parameters of valves of nominal bore 6 and 10 and the technical requirements they must satisfy.
Test methods, inspection rules and packaging requirements are laid down too. The valves it covers run on mineral oil based hydraulic fluid. Its classifications are J20 and 23.100.50, and the issuing body is the Ministry of Industry and Information Technology.
Among the standards it quotes are GB/T 786.1, GB/T 2346, GB/T 2828.1-2012, GB/T 14039-2002 and JB/T 7858. It supersedes JB/T 10365-2002.
Found what you need?
Document preview — JB/T 10365-2014
National Standard of the People's Republic of China
- ICS
- 23.100.50
- Replacing
- JB/T 10365-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- Foreword
- Scope
- Normative references
- About this standard
- Related standards
- Classification and status
1 Foreword
JB/T 10365-2014 was issued by MIIT on 9 July 2014 and has been in force since 1 November 2014.
It replaces the earlier edition JB/T 10365-2002.
2 Scope
This standard is a recommended Chinese machinery industry standard for the solenoid operated directional control valves of hydraulic fluid power systems. It fixes the basic parameters of valves of nominal bore 6 and 10 and the technical requirements they must satisfy. Test methods, inspection rules and packaging requirements are laid down too. The valves it covers run on mineral oil based hydraulic fluid. Its classifications are J20 and 23.100.50, and the issuing body is the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 786.1, GB/T 2346, GB/T 2828.1-2012, GB/T 14039-2002 and JB/T 7858. It supersedes JB/T 10365-2002.
3 Normative references
JB/T 10365-2014 cites the following standards, which apply in full or in part through the references made to them in its clauses.
GB/T 786.1
GB/T 2346
GB/T 2514
GB/T 2828.1-2012 — Plain bearings -- Quality characteristics -- Statistical process control (SPC)
GB/T 7935-2005 — Hydraulic fluid power - General requirements for hydraulic components
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
GB/T 17446
GB/T 17489
JB/T 2184
JB/T 7858
4 About this standard
Issued by: MIIT
English translation: about 20 pages
5 Related standards
Other editions:
JB/T 10365-2002 (earlier edition)
6 Classification and status
International classification (ICS): 23.100.50
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 20 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 786.1Fluid power systems and components - Graphical symbols and circuit diagrams - Part 1: Graphical symbols
- GB/T 2346Fluid power systems and components -- Nominal pressures
- GB/T 2514Hydraulic fluid power -- Four-port directional control valves -- Mounting surfaces
- GB/T 2828.1-2012Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 7935-2005Hydraulic fluid power - General requirements for hydraulic components
- GB/T 14039-2002Hydraulic fluid power—Contamination analysis—Method for coding the level of contamination by solid particles
Similar standards
Editions of JB/T 10365
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10365-2014 | Hydraulic fluid power - Solenoid operated directional control valves | current edition | Current |
| JB/T 10365-2002 | Hydraulic fluid power - Solenoid operated directional control valves | previous edition | Superseded |
This page sells the current edition, JB/T 10365-2014. Earlier editions are listed for reference only.
How to Download JB/T 10365-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Instant delivery (0–9 sec)
Delivery is automatic: within seconds of payment you'll receive an email with a secure download link. The link stays valid for 72 hours.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 14039-2002 — Hydraulic fluid power -- Fluids -- Method for coding the level of contamination by solid particles
GB/T 17446-2024 — Fluid power systems and components - Vocabulary
GB/T 17489-2022 — Hydraulic fluid power - Particulate contamination analysis - Extraction of fluid samples from lines of an operating system
Secure payment via Stripe
Payments accepted
JB/T 10365-2014
$345.00