JB/T 10359-2013Plastics for outdoor units of air conditioners - Environmental technical requirements (English PDF)
空调器室外机用塑料 环境技术要求
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for JB/T 10359-2013 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 31, 2013
Implementation date
July 1, 2014
Scope
JB/T 10359-2013 is the English-translated version of 空调器室外机用塑料 环境技术要求.
JB/T 10359-2013 is a recommended Chinese machinery industry standard setting environmental technical requirements for the plastics used on the outdoor units of air conditioners.
It lays down what is asked of the durability of these plastics and gives the test methods, the inspection rules and the basis on which results are evaluated. The plastic parts exposed on such units are what it addresses.
Classified K15 in the Chinese scheme and 29.035.20 internationally, it was issued by the Ministry of Industry and Information Technology. Among the standards it quotes are GB/T 1040.1-2006, GB/T 1843-2008, GB/T 2423.1-2008, GB/T 9341-2008 and GB/T 16422.2-1999. It replaces JB/T 10359-2002.
Found what you need?
Document preview — JB/T 10359-2013
National Standard of the People's Republic of China
- ICS
- 29.035.20
- Replacing
- JB/T 10359-2002
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Technical requirements
- 4.1 General requirements
- 4.2 Model designation
- 6 Test methods
- 6.1 Factory inspection
- 6.2 Type inspection
- 7 Inspection rules
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
1 Foreword
JB/T 10359-2013 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 31 December 2013 and has been in force since 1 July 2014.
It replaces the earlier edition JB/T 10359-2002.
The JB/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is a recommended Chinese machinery industry standard setting environmental technical requirements for the plastics used on the outdoor units of air conditioners. It lays down what is asked of the durability of these plastics and gives the test methods, the inspection rules and the basis on which results are evaluated. The plastic parts exposed on such units are what it addresses. Classified K15 in the Chinese scheme and 29.035.20 internationally,Among the standards it quotes are GB/T 1040.1-2006, GB/T 1843-2008, GB/T 2423.1-2008, GB/T 9341-2008 and GB/T 16422.2-1999. It replaces JB/T 10359-2002.
JB/T 10359-2013 falls under ICS 29.035.20, in the field of electrical engineering.
This catalogue holds 619 other JB/T standards in that field.
In this catalogue, JB/T standards carry edition years from 1967 to 2026.
3 Normative references
GB/T 1040.1-2006 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic
GB/T 1843-2008 — Plastics - Determination of izod impact strength
GB/T 2423.1-2008 — Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
GB/T 2918-1998 — Plastics. Standard atmospheres for conditioning and testing
GB/T 9341-2008 — Plastics -- Determination of flexural properties
GB/T 15596-2009 — Plastics - Determination of changes in colour and variation in properties after exposure to daylight under glass, natural weathering or laboratory light sources
GB/T 16422.2-1999 — Plastics--Methods of exposure to laboratory light sources Part 2: Xenon--arc sources
GB/T 16422.3-1997 — Plastics--Methods of exposure to laboratory light sources--Part 3: Fluorescent UV lamps
GB/T 17037.1-1997 — Injection moulding of test specimens of thermoplastic materails. Part 1: General principles and moulding of multipurpose and bar test specimens
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
JB/T 10359-2002 (earlier edition)
Standards on related subjects:
NB/T 10328-2019 — Heat-shrinkable polyolefin tubing for high-voltage copper bus-bar of electric vehicles
GB/T 10581-2006 — Method of test for electrical resistance and resistivity of insulating materials at elevated temperatures
JB/T 10441.3-2004 — Crepe insulating paper for electrical purposes - Part 3: Technical requirements
JB/T 14806-2025 — Epoxy-unsaturated polyester resin based active composite for wind turbine insulation
JB/T 14805-2025 — Resin-based active composites for rail transit traction motors
JB/T 10322-2025 — Epoxy resin impregnated fiberglass mesh for electrical insulation
6 Classification and status
International classification (ICS): 29.035.20
Prefix JB/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 1040.1-2006Plastics - Determination of tensile properties - Part 1: General principles
- GB/T 1040.2-2006Plastics – Determination of Tensile Properties – Part 2: Test Conditions for Moulding and Extrusion Plastics
- GB/T 1843-2008Plastics - Determination of izod impact strength
- GB/T 2423.1-2008Environmental testing for electric and electronic products - Part 2: Test methods - Tests A: Cold
- GB/T 2918-1998Plastics -- Standard atmospheres for conditioning and testing
- GB/T 9341-2008Plastics -- Determination of flexural properties
Similar standards
Editions of JB/T 10359
| Edition | Title | Revision | Status |
|---|---|---|---|
| JB/T 10359-2013 | Plastics for outdoor units of air conditioners - Environmental technical requirements | current edition | Current |
| JB/T 10359-2002 | Plastics for outdoor units of air conditioners - Environmental technical requirements | previous edition | Superseded |
This page sells the current edition, JB/T 10359-2013. Earlier editions are listed for reference only.
How to Download JB/T 10359-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1040.1-2006 — Plastics - Determination of tensile properties - Part 1: General principles
GB/T 1040.2-2006 — Plastic - Determination of tensile properties - Part 2: Test conditions for moulding and extrusion plastic
GB/T 15596-2009 — Plastics - Determination of changes in colour and variation in properties after exposure to daylight under glass, natural weathering or laboratory light sources
JB/T 10359-2013
$169.00