HG/T 4635-2014Laser shearography non-destructive testing machines for tyres (English PDF)
轮胎激光散斑无损检测机
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4635-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 4635-2014 is the English-translated version of 轮胎激光散斑无损检测机.
HG/T 4635-2014 is the recommended Chinese chemical industry standard for laser shearography non-destructive testing machines used on tyres. It fixes the terms and definitions for this equipment, the product models and their basic parameters, and the requirements the machines have to meet.
Testing, the inspection and decision rules, and the marking, packaging, transport and storage of the machines are covered as well.
It quotes GB/T 191-2008, GB 4208-2008, GB 5226.1-2008, GB/T 6326, GB 7247.1-2001, GB/T 8196, GB/T 13306, GB/T 13384, GB 16754, GB/T 18831, GB/T 24342, GB/T 24343, GB/T 24344, HG/T 2108-1991, HG/T 3120, HG/T 3223 and HG/T 3228-2001. Issued on 6 May 2014, it has applied since 1 October 2014.
Found what you need?
Document preview — HG/T 4635-2014
National Standard of the People's Republic of China
- ICS
- 71.120
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative references
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4635-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for laser shearography non-destructive testing machines used on tyres. It fixes the terms and definitions for this equipment, the product models and their basic parameters, and the requirements the machines have to meet. Testing, the inspection and decision rules, and the marking, packaging, transport and storage of the machines are covered as well. It quotes GB/T 191-2008, GB 4208-2008, GB 5226.1-2008, GB/T 6326, GB 7247.1-2001, GB/T 8196, GB/T 13306, GB/T 13384, GB 16754, GB/T 18831, GB/T 24342, GB/T 24343, GB/T 24344, HG/T 2108-1991, HG/T 3120, HG/T 3223 and HG/T 3228-2001.
HG/T 4635-2014 falls under ICS 71.120, in the field of chemical technology.
This catalogue holds 1,628 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 191-2008 — Packaging - Pictorial marking for handling of goods
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
GB 5226.1-2008 — Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
GB/T 6326
GB 7247.1-2001 — Safety of laser products - Part 1: Equipment classification, requirements and user guide
GB/T 8196
GB/T 13306
GB/T 13384
GB 16754
GB/T 18831
GB/T 24342
GB/T 24343
GB/T 24344
HG/T 2108-1991 — Determination of Noise Pressure Level of Rubber Machinery
HG/T 3120
HG/T 3223
HG/T 3228-2001 — General technical specifications for painting of rubber and plastics machinery
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 25156-2020 — General specifications and inspection methods of rubber and plastics injection moulding machines
JB/T 8539-2013 — Plastic Extrusion Blow Molding Machines
GB 20055-2006 — Safety requirements of mill for rubber and plastics
HG/T 6432-2025 — Oil temperature control system for rubber and plastics machinery
HG/T 6382-2025 — Technical requirements of electron accelerator for tire irradiation processing
HG/T 3654-2022 — Rubber sheet grinding machines
6 Classification and status
International classification (ICS): 71.120
Chinese Standard Classification (CCS): G 95
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 191-2008Graphical symbols marking for handling and storage of packages
- GB 4208-2008Degrees of Protection Provided By Enclosure (IP Code)
- GB 5226.1-2008Electrical safety of machinery - Electrical equipment of machines - Part 1: General requirements
- GB/T 6326Tyre - Vocabulary
- GB 7247.1-2001Safety of laser products - Part 1: Equipment classification and requirements
- GB/T 8196Safety of machinery -- Guards -- General requirements for the design and construction of fixed and movable guards
Similar standards
How to Download HG/T 4635-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 16754-1997 — Safety of machinery--Emergency stop--Principles for design
GB 16754-2008 — Safety of machinery - Emergency stop - Principles for design
GB 4208-2008 — Degrees of Protection Provided By Enclosure (IP Code)
HG/T 4635-2014
$115.00