GB/T 23664-2009Test method of non-destructive inspection for automobile tyres - X-ray method (English PDF)
汽车轮胎无损检验方法 X射线法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 23664-2009 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
April 24, 2009
Implementation date
December 1, 2009
Scope
GB/T 23664-2009 is the English-translated version of 汽车轮胎无损检验方法 X射线法.
GB/T 23664-2009 is the Chinese standard "Test method of non-destructive inspection for automobile tyres - X-ray method". Its scope clause reads: This standard specifies the car tire X-ray non-destructive testing of terms and definitions, principle, test equipment, testing conditions, test procedures, test Determination and inspection records.
This standard applies to passenger cars, trucks pneumatic radial tire. Its clauses include terms and definitions.
Found what you need?
Document preview — GB/T 23664-2009
National Standard of the People's Republic of China
- ICS
- 83.160.10
- Classification
- G 41
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 5.1 X-ray tube
- 5.2 Image Processing System
- 5.3 X-ray shielding lead room
- 5.4 mechanical movement system
1 Scope
This standard specifies the car tire X-ray non-destructive testing of terms and definitions, principle, test equipment, testing conditions, test procedures, test
Determination and inspection records.
This standard applies to passenger cars, trucks pneumatic radial tire.
2 Normative references
The following documents contain provisions which, through reference in this standard and become the standard terms. For dated references, subsequent
Amendments (not including errata content) or revisions do not apply to this standard, however, encourage the parties to the agreement are based on research
Whether the latest versions of these documents. For undated reference documents, the latest versions apply to this standard.
GB/T 6326 tires terms and definitions (GB/T 6326-2005, ISO 4223-1.2002, Definitionsofsometerms usedintyreindustry-Part 1. Pneumatictyres, NEQ)
GB Z117 industrial X-ray inspection health protection standards
3 Terms and Definitions
Terms and definitions GB/T 6326 established apply to this standard.
Principle 4
This method using X-ray showing a different degree of attenuation through the different substances, through the detection system and image processing system, wheel
Fetal various parts of the non-destructive testing.
5 testing equipment
5.1 X-ray tube
5.1.1
X-ray emission angle should ensure that the tire does not detect the presence of the dead in the case of continuous detection.
5.1.2
X-ray emission should have sufficient strength to ensure that present a clear image of the tire components of different thickness irradiated.
5.2 Image Processing System
The image processing system should have an electronic offset and gain calibration function to ensure stable clear image, so that the entire inner tire
Section diagram displayed on the display scroll.
5.3 X-ray shielding lead room
You can shield diverging X-ray, X-ray radiation proof rating shall comply with the requirements of national standard GB Z117, protecting the environment and human
Safety.
5.4 mechanical movement system
5.4.1 Tire Drive System
Tire driving test tire systems should accurately locate and to ensure uniform rotation of the tire test.
5.4.2 X-ray tube drive system
X-ray tube drive system should enable accurate mobile X-ray tube and the X-ray tube to ensure accurate positioning between the two beads.
5.4.3 Detector Drive System
Detector detector drive system should enable accurate mobile positioning and to ensure that the detector receives the tires through the X-ray.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 23664-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 23664-2009
$165.00