HG/T 4333.1-2012Treatment and disposal methods for cyanide spills - Part 1: Sodium cyanide (English PDF)
氰化物泄漏的处理处置方法 第1部分:氰化钠
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4333.1-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 4333.1-2012 is the English-translated version of 氰化物泄漏的处理处置方法 第1部分:氰化钠.
HG/T 4333.1-2012 opens the Chinese chemical industry series on cyanide spills with the part for sodium cyanide.
It gives the physicochemical properties of sodium cyanide and its hazards, defines the terms used for the treatment and disposal of a spill, and lays down the emergency measures for a leak, the environmental monitoring to be carried out on site, and the treatment and disposal of the leaking site.
Three documents are quoted in it: GB 12268-2005, GB/T 18664-2002 and GB/T 24536-2009. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 4333.1-2012
National Standard of the People's Republic of China
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 1.1 Terms
- 2 Normative References
- 2.1 Layout principle
- 2.2 General requirements
- 2.3 Example of layout
- 3 Clear distance, clearance and relevant elevations
- 4 Operating platform and ladder
- 5 Other requirements of layout design
- 6 Layout of horizontal vessels
- 7 Layout of vertical vessels and reactors
- 8 Layout of heating furnace
- 9 Layout of centrifugal compressor
1 Foreword
HG/T 4333.1-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
It is one of 2 parts of the HG/T 4333 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
HG/T 4333.1-2012 opens the Chinese chemical industry series on cyanide spills with the part for sodium cyanide. It gives the physicochemical properties of sodium cyanide and its hazards, defines the terms used for the treatment and disposal of a spill, and lays down the emergency measures for a leak, the environmental monitoring to be carried out on site, and the treatment and disposal of the leaking site. Three documents are quoted in it: GB 12268-2005, GB/T 18664-2002 and GB/T 24536-2009.
HG/T 4333.1-2012 carries no ICS number and no Chinese Standard Classification code.
This catalogue holds 6,683 other HG/T standards.
Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.
3 Normative references
GB 12268-2005 — List of dangerous goods [including MODIFICATION 1]
GB/T 18664-2002 — Selection, use and maintenance of respiratory protective equipment
GB/T 24536-2009 — Protective clothing - Selection, use and maintenance of chemical protective clothing
4 Where this standard sits
It cites 3 standards, among them GB 12268-2005, GB/T 18664-2002, GB/T 24536-2009, listed in full above.
It is one part of the HG/T 4333 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 4333.2-2012 — Part 2: Potassium cyanide
Standards on related subjects:
GB 22128-2019 — Technical specifications for end-of-life vehicles collecting and dismantling enterprises
GB 8702-2014 — Controlling limits for electromagnetic environment
HJ 607-2011 — Technical Specifications for Pollution Control of Used Mineral Oil Recovery, Recycle and Reuse
HG/T 4334.1-2012 — Treatment and disposal methods for alkali spills - Part 1: Sodium hydroxide
HG/T 4332-2012 — Treatment and disposal methods for trichloroisocyanuric acid spills
7 Classification and status
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
Similar standards
How to Download HG/T 4333.1-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB 12268-2005 — List of dangerous goods [including MODIFICATION 1]
GB/T 18664-2002 — Selection, use and maintenance of respiratory protective equipment
GB/T 24536-2009 — Protective clothing - Selection, use and maintenance of chemical protective clothing
HG/T 4333.1-2012
$165.00