Valid

HG/T 4333.2-2012Treatment and disposal methods for cyanide spills - Part 2: Potassium cyanide (English PDF)

氰化物泄漏的处理处置方法 第2部分:氰化钾

Preview PDF

This is a limited preview

Buy now to download the full PDF (15 pages)

Need quotation for your management?

Get a formal quotation for HG/T 4333.2-2012 in 30 minutes.

Issued by

MIIT

Level / Type

Industry · Recommended

Issue date

December 28, 2012

Implementation date

June 1, 2013

Scope

HG/T 4333.2-2012 is the English-translated version of 氰化物泄漏的处理处置方法 第2部分:氰化钾.

Part 2 of the HG/T 4333 series, HG/T 4333.2-2012, applies the same treatment to potassium cyanide.

The Chinese chemical industry standard sets out the physicochemical properties of potassium cyanide and the harm it can cause, gives the terms and definitions used in spill treatment and disposal, and then covers the emergency measures for a leak, the environmental monitoring on site, and the treatment and disposal of the place where the cyanide has escaped.

It is a recommended standard, classified Z05 in China and under ICS 13.030.20. It quotes GB 12268-2005, GB/T 18664-2002 and GB/T 24536-2009. Issued on 28 December 2012, it has applied since 1 June 2013.

Found what you need?

Document preview — HG/T 4333.2-2012

National Standard of the People's Republic of China

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

Contents

  • [Preview only]
  • 1 Scope
  • 1.1 Terms
  • 2 Normative References
  • 2.1 Layout principle
  • 2.2 General requirements
  • 2.3 Example of layout
  • 3 Clear distance, clearance and relevant elevations
  • 4 Operating platform and ladder
  • 5 Other requirements of layout design
  • 6 Layout of horizontal vessels
  • 7 Layout of vertical vessels and reactors
  • 8 Layout of heating furnace
  • 9 Layout of centrifugal compressor

1 Foreword

HG/T 4333.2-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.

It is one of 2 parts of the HG/T 4333 series.

The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.

2 Scope Preview

Part 2 of the HG/T 4333 series, HG/T 4333.2-2012, applies the same treatment to potassium cyanide. The Chinese chemical industry standard sets out the physicochemical properties of potassium cyanide and the harm it can cause, gives the terms and definitions used in spill treatment and disposal, and then covers the emergency measures for a leak, the environmental monitoring on site, and the treatment and disposal of the place where the cyanide has escaped. It is a recommended standard, classified Z05 in China and under ICS 13.030.20. It quotes GB 12268-2005, GB/T 18664-2002 and GB/T 24536-2009.

HG/T 4333.2-2012 carries no ICS number and no Chinese Standard Classification code.

This catalogue holds 6,683 other HG/T standards.

Of the 2,593 HG/T standards that do carry an ICS number, 1,629 (63%) fall under ICS 71, in the field of chemical technology.

3 Normative references

GB 12268-2005 — List of dangerous goods [including MODIFICATION 1]

GB/T 18664-2002 — Selection, use and maintenance of respiratory protective equipment

GB/T 24536-2009 — Protective clothing - Selection, use and maintenance of chemical protective clothing

4 Where this standard sits

It cites 3 standards, among them GB 12268-2005, GB/T 18664-2002, GB/T 24536-2009, listed in full above.

It is one part of the HG/T 4333 series, of which this catalogue holds 2 parts.

5 About this standard

Issued by: Ministry of Industry and Information Technology of the People's Republic of China

English translation: about 15 pages

6 Related standards

Other parts of this standard:

HG/T 4333.1-2012 — Part 1: Sodium cyanide

Standards on related subjects:

GB 22128-2019 — Technical specifications for end-of-life vehicles collecting and dismantling enterprises

GB 8702-2014 — Controlling limits for electromagnetic environment

HJ 607-2011 — Technical Specifications for Pollution Control of Used Mineral Oil Recovery, Recycle and Reuse

HG/T 4334.1-2012 — Treatment and disposal methods for alkali spills - Part 1: Sodium hydroxide

HG/T 4332-2012 — Treatment and disposal methods for trichloroisocyanuric acid spills

7 Classification and status

Prefix HG/T: recommended standard.

......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.

Referenced standards

Similar standards

How to Download HG/T 4333.2-2012

  1. 1

    Add to cart

    Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.

  2. 2

    Checkout

    Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).

  3. 3

    Fast delivery

    After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.

  4. 4

    Invoice included

    A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.

Related Standards

English PDF
15 pages
Fast delivery
Invoice included
View Cart

Secure payment via Stripe

Payments accepted

VisaMastercardAmerican ExpressApple PayGoogle PayStripe

HG/T 4333.2-2012

$165.00