HG/T 4334.1-2012Treatment and disposal methods for alkali spills - Part 1: Sodium hydroxide (English PDF)
碱类物质泄漏的处理处置方法 第1部分:氢氧化钠
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4334.1-2012 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 28, 2012
Implementation date
June 1, 2013
Scope
HG/T 4334.1-2012 is the English-translated version of 碱类物质泄漏的处理处置方法 第1部分:氢氧化钠.
HG/T 4334.1-2012 is the first part of the Chinese chemical industry series on alkali spills, and it covers sodium hydroxide in both solid form and solution.
The standard describes the physicochemical properties of sodium hydroxide and the dangers it presents, then provides the emergency measures for a leak, the method for treating the spill site and the method for disposing of the spilled alkali.
It is a recommended standard carrying the Chinese classification Z05 and ICS 13.030.20. GB 12268-2005, GB/T 18664-2002, GB 20266-2006, GB/T 24536-2009 and AQ 6102-2007 are cited in it. Issued on 28 December 2012, it has applied since 1 June 2013.
Found what you need?
Document preview — HG/T 4334.1-2012
National Standard of the People's Republic of China
- ICS
- 13.030.20
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 4 Molecular formula and relative molecular mass
- 5 Classification
- 6 Test methods
- 6.1 General provisions
- 6.2 Appearance inspection
- 7 Inspection Rules
- 9 Marking and accompanying documents
1 Foreword
HG/T 4334.1-2012 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 28 December 2012 and has been in force since 1 June 2013.
It is one of 2 parts of the HG/T 4334 series.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the first part of the Chinese chemical industry series on alkali spills, and it covers sodium hydroxide in both solid form and solution. The standard describes the physicochemical properties of sodium hydroxide and the dangers it presents, then provides the emergency measures for a leak, the method for treating the spill site and the method for disposing of the spilled alkali. It is a recommended standard carrying the Chinese classification Z05 and ICS 13.030.20. GB 12268-2005, GB/T 18664-2002, GB 20266-2006, GB/T 24536-2009 and AQ 6102-2007 are cited in it.
HG/T 4334.1-2012 falls under ICS 13.030.20, in the field of environment and health protection, safety.
This catalogue holds 95 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB 12268-2005 — List of dangerous goods [including MODIFICATION 1]
GB/T 18664-2002 — Selection, use and maintenance of respiratory protective equipment
GB 20266-2006 — Rubber industrial boots with chemical resistance
GB/T 24536-2009 — Protective clothing - Selection, use and maintenance of chemical protective clothing
AQ 6102-2007 — Acid and Alkali Resistant Gloves
4 Where this standard sits
It cites 5 standards, among them GB 12268-2005, GB/T 18664-2002, GB 20266-2006, listed in full above.
It is one part of the HG/T 4334 series, of which this catalogue holds 2 parts.
5 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
6 Related standards
Other parts of this standard:
HG/T 4334.2-2012 — Part 2: Potassium hydroxide
Standards on related subjects:
GB 22128-2019 — Technical specifications for end-of-life vehicles collecting and dismantling enterprises
GB 8702-2014 — Controlling limits for electromagnetic environment
HJ 607-2011 — Technical Specifications for Pollution Control of Used Mineral Oil Recovery, Recycle and Reuse
HG/T 4333.1-2012 — Treatment and disposal methods for cyanide spills - Part 1: Sodium cyanide
HG/T 4332-2012 — Treatment and disposal methods for trichloroisocyanuric acid spills
7 Classification and status
International classification (ICS): 13.030.20
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB 12268-2005List of dangerous goods
- GB/T 18664-2002Selection, use and maintenance of respiratory protective equipment
- GB 20266-2006Rubber industrial boots with chemical resistance
- GB/T 24536-2009Protective clothing - Selection, use and maintenance of chemical protective clothing
- AQ 6102-2007Acid and Alkali Resistant Gloves
Similar standards
How to Download HG/T 4334.1-2012
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
HG/T 4334.1-2012
$135.00