HG/T 3955-2007Sliding cups for washing machines (English PDF)
洗衣机滑动皮碗
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 3955-2007 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
July 20, 2007
Implementation date
January 1, 2008
Scope
HG/T 3955-2007 is the English-translated version of 洗衣机滑动皮碗.
HG/T 3955-2007 is a recommended chemical industry standard of China covering sliding cups for washing machines. It describes the structural types of the sliding cup and then fixes the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage.
Its scope is limited to sliding cups fitted to washing boom systems. Assessment draws on the rubber test methods of GB/T 528-1998, GB/T 531-1999, GB/T 1690-1992, GB/T 3512-2001 and GB/T 7759-1996, with GB/T 2828.1 and GB/T 5721 also cited. Issued on 20 July 2007, it has applied since 1 January 2008.
Found what you need?
Document preview — HG/T 3955-2007
National Standard of the People's Republic of China
- ICS
- 83.140.99
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 3955-2007 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 20 July 2007.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended chemical industry standard of China covering sliding cups for washing machines. It describes the structural types of the sliding cup and then fixes the requirements, the test methods, the inspection rules and the provisions for marking, packaging, transport and storage. Its scope is limited to sliding cups fitted to washing boom systems. Assessment draws on the rubber test methods of GB/T 528-1998, GB/T 531-1999, GB/T 1690-1992, GB/T 3512-2001 and GB/T 7759-1996, with GB/T 2828.1 and GB/T 5721 also cited.
HG/T 3955-2007 falls under ICS 83.140.99, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528-1998 — Rubber, vulcanized or thermoplastic--Determination of tensile stress-strain properties [including MODIFICATION 1]
GB/T 531-1999 — Rubber--Determination of indentation hardness by means of pocket hardness meters
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
GB/T 2828.1
GB/T 3512-2001 — Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests - Air-oven method
GB/T 5721
GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 14833-2020 — Synthetic materials sports field surfaces
HG/T 4070-2008 — Silicone rubber sheets
GB/T 5574-2008 — Industrial rubber sheet
HG/T 6323-2024 — Two-piece can coloring rubber rollers
HG/T 2821.1-2023 — Dipped polyester cords for V-belts and V-ribbed belts - Part 1: Stiff cords
HG/T 2793-2023 — Conductive and antistatic rubber sheets for industrial use
6 Classification and status
International classification (ICS): 83.140.99
Chinese Standard Classification (CCS): G 47
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528-1998Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531-1999Rubber--Determination of indentation hardness by means of pocket hardness meters
- GB/T 1690-1992Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3512-2001Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
- GB/T 5721General rules of identification, packaging, transportation and storage for rubber sealing products
Similar standards
How to Download HG/T 3955-2007
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
GB/T 2828.1-2003 — Sampling procedures - Part 1: retrieval by acceptance quality limit (AQL) for lot-by-lot inspection sampling plan
GB/T 2828.1-2012 — Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
HG/T 3955-2007
$145.00