HG/T 4117-2009Rubber water seals for washing machines (English PDF)
洗衣机橡胶水封
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 4117-2009 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
December 4, 2009
Implementation date
June 1, 2010
Scope
HG/T 4117-2009 is the English-translated version of 洗衣机橡胶水封.
HG/T 4117-2009 is a recommended chemical industry standard for the rubber seals fitted on the shaft of a washing machine, commonly called water seals.
It describes their basic structure, their sizes and the code by which dimensions are identified, and then sets the requirements, the inspection rules, the test methods and the provisions for marking, packaging, transport and storage.
It covers seals for automatic and fully automatic washing machines with shaft diameters of 10 mm to 100 mm and a working pressure below 0.05 MPa. Verification uses GB/T 528, GB/T 531.1, GB/T 1682, GB/T 1690-1992, GB/T 3512, GB/T 7759-1996 and GB/T 15326-1994, with sampling under GB/T 2828.1. Issued on 4 December 2009, it has applied since 1 June 2010.
Found what you need?
Document preview — HG/T 4117-2009
National Standard of the People's Republic of China
- ICS
- 83.140.50
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 4117-2009 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 4 December 2009 and has been in force since 1 June 2010.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
The document runs to 15 pages in English translation.
2 Scope Preview
This standard is a recommended chemical industry standard for the rubber seals fitted on the shaft of a washing machine, commonly called water seals. It describes their basic structure, their sizes and the code by which dimensions are identified, and then sets the requirements, the inspection rules, the test methods and the provisions for marking, packaging, transport and storage. It covers seals for automatic and fully automatic washing machines with shaft diameters of 10 mm to 100 mm and a working pressure below 0.05 MPa. Verification uses GB/T 528, GB/T 531.1, GB/T 1682, GB/T 1690-1992, GB/T 3512, GB/T 7759-1996 and GB/T 15326-1994, with sampling under GB/T 2828.1.
HG/T 4117-2009 falls under ICS 83.140.50, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 528
GB/T 531.1
GB/T 1682
GB/T 1690-1992 — Rubber, vulcanized-Determination of the effect of liquids
GB/T 2828.1
GB/T 3512
GB/T 7759-1996 — Rubber, Vulcanized or thermoplastic--Determination of compression set at ambient elevated or low temperatures
GB/T 15326-1994 — Appearance quality for rotary shaft lip seals
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Standards on related subjects:
GB/T 3672.1-2025 — Tolerances for rubber products - Part 1: Dimensional tolerances
HG/T 4622-2014 — Rubber compounds for seals used for dimethyl ether
GB/T 5721-1993 — General rules of identification, packaging, transportation and storage for rubber sealing products
HG/T 6183-2023 — Ductile iron pipe interface anti-slip and anti-loosening rubber sealing ring
HG/T 6181-2023 — Rubber gaskets for engine oil pans
HG/T 4116-2023 — Rubber gaskets for drum washing machine viewing windows
6 Classification and status
International classification (ICS): 83.140.50
Chinese Standard Classification (CCS): G 43
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 528Rubber, vulcanized or thermoplastic -- Determination of tensile stress-strain properties
- GB/T 531.1Rubber, vulcanized or thermoplastic -- Determination of indentation hardness -- Part 1: Durometer method (Shore hardness)
- GB/T 1682Vulcanized rubber - Determination of low-temperature brittleness - Single test piece method
- GB/T 1690-1992Rubber, vulcanized or thermoplastic—Determination of the effect of liquids
- GB/T 2828.1Sampling procedures for inspection by attributes - Part 1: Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
- GB/T 3512Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests in hot air
Similar standards
How to Download HG/T 4117-2009
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 15326-1994 — Appearance quality for rotary shaft lip seals
GB/T 1682-1994 — Rubber, vulcanized--Determination of low-temperature brittleness (single test piece method)
GB/T 1682-2014 — Vulcanized rubber - Determination of low-temperature brittleness - Single test piece method
HG/T 4117-2009
$85.00