GB/T 29642-2013Rubber seals - method for extraction by using water (English PDF)
橡胶密封制品 水浸出液的制备方法
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for GB/T 29642-2013 in 30 minutes.
Issued by
SAMR; SAC
Level / Type
National · Recommended
Issue date
September 6, 2013
Implementation date
January 31, 2014
Scope
GB/T 29642-2013 is the English-translated version of 橡胶密封制品 水浸出液的制备方法.
GB/T 29642-2013 is the Chinese standard "Rubber seals - method for extraction by using water". Its scope clause reads: This standard specifies a method for preparing the area of \u200b\u200bcontact with water in the ratio of 20cm2/L or less rubber seal products flooding the liquid.
This standard applies to water pipe rubber seal products with physical and chemical testing of water quality flooding preparation liquid. Its clauses include terms and definitions; reagents and instruments.
Found what you need?
Document preview — GB/T 29642-2013
National Standard of the People's Republic of China
- ICS
- 83.140.50
- Classification
- G 43
Issued by: State Administration for Market Regulation; Standardization Administration of the PRC
Contents
- 1 Scope
- 2 Normative references
- 3 Terms and Definitions
- 4 Reagents and Instruments
1 Scope
This standard specifies a method for preparing the area of contact with water in the ratio of 20cm2/L or less rubber seal products flooding the liquid.
This standard applies to water pipe rubber seal products with physical and chemical testing of water quality flooding preparation liquid.
2 Normative references
The following documents for the application of this document is essential. For dated references, only the dated version suitable for use herein
Member. For undated references, the latest edition (including any amendments) applies to this document.
GB/T 5750.11-2006 Standard examination methods for drinking water disinfectants Index
Laboratory use specifications and test methods GB/T 6682 Analysis
GB 9985 hand dishwashing detergents
3 Terms and Definitions
The following terms and definitions apply to this document.
3.1 Soaking water aqueoussolutionforextractiontest
Formulated as an aqueous solution according to the method prescribed requirements for sample water leaching test.
3.2 Leachate extractsolution
Samples were obtained by flooding after the test sample solution.
4 Reagents and Instruments
4.1 Overview
Unless otherwise specified, water as a water GB/T 6682 regulations, reagents were of analytical grade. Test appliance shall be tested items
Objective requires clean; microbiological tests must be pre-sterilized containers used during the test should be taken to prevent microbial contamination.
4.2
plug Erlenmeyer flask, 1000mL.
4.3
cylinder, 500mL.
4.4
water bath oscillator, temperature control accuracy of 1 °C, can cyclotron oscillations, with cover.
4.5
glass funnel, 100mL.
4.6 chlorine stock solution
Take 7.3mL sodium hypochlorite solution (5% NaClO), diluted with water to 200mL, stored in a sealed brown bottle with stopper
In, 20 °C stored. According to GB/T 5750.11-2006 in 2.1.5.3 ~ 2.1.6 Step calibrated and calculated chlorine content,
Value is designated as "A". Validity of the week.
NOTE. chlorine content of chlorine in this way prepared stock solution was about 0.086% (0.86mg/mL).
4.7
chlorine solution (2.0mg/L). Take appropriate volume of chlorine stock solution (4.6), diluted with water to the required volume. We need access to chlorine reserve
The amount of liquid, according to equation (1).
V = 2.0 × B/A (1) […]
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Similar standards
How to Download GB/T 29642-2013
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 10003-2026 — Biaxially oriented polypropylene (BOPP) film
GB/T 10004-2026 — Plastic/Plastic laminated films and pouches for packaging
GB/T 10007-2026 — Rigid cellular plastics - Determination of shear properties
GB/T 29642-2013
$125.00