HG/T 2193-2014Rubber and plastics inlet hoses and hose assemblies for washing machines and dishwashers - Specification (English PDF)
洗衣机和洗碗机用橡胶和塑料进水软管和软管组合件 规范
This is a limited preview
Buy now to download the full PDF (15 pages)
Need quotation for your management?
Get a formal quotation for HG/T 2193-2014 in 30 minutes.
Issued by
MIIT
Level / Type
Industry · Recommended
Issue date
May 6, 2014
Implementation date
October 1, 2014
Scope
HG/T 2193-2014 is the English-translated version of 洗衣机和洗碗机用橡胶和塑料进水软管和软管组合件 规范.
HG/T 2193-2014 is the recommended Chinese chemical industry standard for rubber and plastics inlet hoses and hose assemblies used on washing machines and dishwashers.
It gives the requirements for three types of domestic inlet hose and hose assembly connected to a supply at a pressure of not more than 1 MPa, that is 10 bar. The standard is an identical adoption of ISO 6804:2009 and it replaces HG/T 2193-2008.
Its provisions rest on GB/T 5565-2006 and GB/T 24134-2009 together with a set of ISO standards, among them ISO 188, ISO 1307, ISO 1402, ISO 4671, the four parts of ISO 4892, ISO 8033, ISO 8330, ISO 8331 and ISO 23529.
Found what you need?
Document preview — HG/T 2193-2014
National Standard of the People's Republic of China
- ICS
- 83.140.40
- Replacing
- HG/T 2193-2008
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
Contents
- [Preview only]
- 1 Scope
- 2 Normative References
- 3 Terms and definitions
- 3.1 Category A
- 3.2 Category B
- 4 Classification and designation
- 4.1 General
- 4.2 Character group 1
- 4.3 Character group 2
- 4.4 Character group 3
- 4.5 Character group 4
- 4.6 Designation example
- 5 Test Methods
- 5.1 Appearance requirements
- 5.2 Technical requirements
- 5.3 Environmental requirements
- 6.1 Test conditions
- 6.2 Test substrate
- 6.3 Apparatus
- 6.4 Appearance
- 6.5 Coating property
- 6.6 Shear elongation
- 6.7 Tensile shear strength
- 6.8 Tensile bond strength
- 6.9 Free formaldehyde
- 7 Inspection rules
- 7.1 Inspection
- 7.2 Batching
- 7.3 Sampling
- 7.4 Judgment of inspection results
- 8 Marking, packaging, transportation and storage
- 8.1 Marking
- 8.2 Packaging
- 8.3 Transportation
- 8.4 Storage
- 9 Packaging, transportation and storage
1 Foreword
HG/T 2193-2014 was issued by Ministry of Industry and Information Technology of the People's Republic of China on 6 May 2014 and has been in force since 1 October 2014.
It replaces the earlier edition HG/T 2193-2008, HG/T 2193-1991.
The HG/T prefix marks a recommended standard. It is not law in itself: it becomes binding when a contract names it, when a regulation or a mandatory standard refers to it, or when a producer declares conformity with it.
2 Scope Preview
This standard is the recommended Chinese chemical industry standard for rubber and plastics inlet hoses and hose assemblies used on washing machines and dishwashers. It gives the requirements for three types of domestic inlet hose and hose assembly connected to a supply at a pressure of not more than 1 MPa, that is 10 bar. The standard is an identical adoption of ISO 6804:2009 and it replaces HG/T 2193-2008. Its provisions rest on GB/T 5565-2006 and GB/T 24134-2009 together with a set of ISO standards, among them ISO 188, ISO 1307, ISO 1402, ISO 4671, the four parts of ISO 4892, ISO 8033, ISO 8330, ISO 8331 and ISO 23529.
HG/T 2193-2014 falls under ICS 83.140.40, in the field of rubber and plastics industries.
This catalogue holds 313 other HG/T standards in that field.
In this catalogue, HG/T standards carry edition years from 1975 to 2026.
3 Normative references
GB/T 5565-2006 — Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperatures
GB/T 24134-2009 — Rubber and plastics hoses-Assessment of ozone resistance under static conditions
ISO 188
ISO 1307
ISO 1402
ISO 4671
ISO 4892-1
ISO 4892-2
ISO 4892-3
ISO 4892-4
ISO 8033
ISO 8330
ISO 8331
ISO 23529
4 About this standard
Issued by: Ministry of Industry and Information Technology of the People's Republic of China
English translation: about 15 pages
5 Related standards
Other editions:
HG/T 2193-2008 (earlier edition)
HG/T 2193-1991 (earlier edition)
Standards on related subjects:
MT/T 914-2019 — Textile fire resistant conveyor belting for coalmine
GB/T 1171-2017 — Classical V-belt for general drive
GB/T 2550-2016 — Gas welding equipment -- Rubber hoses for welding, cutting and allied processes
HG/T 2183-2014 — Dilute acid and alkali resistant rubber hose
HG/T 2192-2008 — Rubber hoses for sand and grit blasting. Specification
HG/T 2184-2008 — Rubber hoses, textile-reinforced, for general-purpose water applications
6 Classification and status
International classification (ICS): 83.140.40
Chinese Standard Classification (CCS): G 42
Prefix HG/T: recommended standard.
......
This preview omits tables, figures, formulas and parts of the technical clauses. The complete document — 15 pages — is available in the English PDF.
Referenced standards
Normative references
- GB/T 5565-2006Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperatures
- GB/T 24134-2009Rubber and plastics hoses - Assessment of ozone resistance under static conditions
ISO 188 · ISO 1307 · ISO 1402 · ISO 4671 · ISO 4892-1 · ISO 4892-2 · ISO 4892-3 · ISO 4892-4 · ISO 8033 · ISO 8330 · ISO 8331 · ISO 23529
Similar standards
Editions of HG/T 2193
| Edition | Title | Revision | Status |
|---|---|---|---|
| HG/T 2193-2014 | Rubber and plastics inlet hoses and hose assemblies for washing machines and dishwashers - Specification | current edition | Current |
| HG/T 2193-2008 | Rubber and plastics inlet hoses and hose assemblies for washing machines and dishwashers - Specification | previous edition | Superseded |
This page sells the current edition, HG/T 2193-2014. Earlier editions are listed for reference only.
How to Download HG/T 2193-2014
- 1
Add to cart
Click "Download PDF" on this page and choose "Buy this standard". You can add more standards before checkout.
- 2
Checkout
Enter your email and billing details. Payment is processed securely by Stripe (cards or bank transfer). Prefer bank details? Request a quotation (min. order $300).
- 3
Fast delivery
After payment you'll receive an email confirmation. The English PDF is sent to the same address, usually within minutes and at the latest within 1 business day.
- 4
Invoice included
A tax invoice is attached to the confirmation email. Need a custom invoice? Contact us.
Related Standards
GB/T 24134-2009 — Rubber and plastics hoses-Assessment of ozone resistance under static conditions
GB/T 5565-2006 — Rubber and plastics hoses and tubing -- Measurement of flexibility and stiffness -- Part 1: Bending tests at ambient temperatures
HG/T 2016-2026 — Rubber-soled sports shoes for basketball and volleyball
HG/T 2193-2014
$165.00